Part Number: 25L3206E
Function: 32M-BIT [x 1 / x 2] CMOS SERIAL FLASH
Package: SOP 8 Pin, SOP 16 Pin, 24-Ball BGA Type
Manufacturer: Macronix International
Image:
Description
The 25L3206E feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus. The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access to the device is enabled by CS# input. When it is in Dual Output read mode, the SI and SO pins become SIO0 and SIO1 pins for data output.
After program/erase command is issued, auto program/ erase algorithms which program/ erase and verify the specified page or sector/block locations will be executed. Program command is executed on byte basis, or page basis, or word basis for erase command is executes on sector, or block, or whole chip basis.
Pinout
Features
1. Single Power Supply Operation
– 2.7 to 3.6 volt for read, erase, and program operations
2. Serial Peripheral Interface compatible — Mode 0 and Mode 3
3. 33,554,432 x 1 bit structure or 16,777,216 x 2 bits (Dual Output mode) structure
4. 1024 Equal Sectors with 4K byte each
– Any Sector can be erased individually
5. 64 Equal Blocks with 64K byte each
– Any Block can be erased individually
6. Program Capability
– Byte base
– Page base (256 bytes)
7. Latch-up protected to 100mA from -1V to Vcc +1V
PERFORMANCE :
1. High Performance
– Fast access time: 86MHz serial clock
– Serial clock of Dual Output mode : 80MHz
– Fast program time: 1.4ms(typ.) and 5ms(max.)/page
– Byte program time: 9us (typical)
Other data sheets are available within the file:
25L3206EMI-12G, 25L3206EPI-12G, 25L3206EZNI-12G
25L3206E Datasheet PDF Download
