74HC123 Datasheet – Monostable Multivibrator – Philips

Part Number: 74HC123

Function : Dual retriggerable monostable multivibrator with reset

Package: SOP 16 Pin

Manufacturer: Philips

Image:

74HC123

Description

The 74HC/HCT123 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A.
The 74HC/HCT123 are dual retriggerable monostable multivibrators with output pulse width control by three methods. The basic pulse time is programmed by selection of an external resistor (REXT) and capacitor (CEXT). The external resistor and capacitor are normally connected as shown in Fig.6.
Once triggered, the basic output pulse width may be extended by retriggering the gated active
LOW-going edge input (nA) or the active HIGH-going edge input (nB). By repeating this process, the output pulse period (nQ = HIGH, nQ = LOW) can be made as long as desired. Alternatively an output delay can be terminated at any time by a LOW-going edge on input nRD, which also inhibits the triggering.

Features

• DC triggered from active HIGH or active LOW inputs
• Retriggerable for very long pulses up to 100% duty factor
• Direct reset terminates output pulse
• Schmitt-trigger action on all inputs except for the reset input
• Output capability: standard (except for nREXT/CEXT)
• ICCcategory: MSI

Pinout and Function Table

74HC123 Datasheet

74HC123 Datasheet

 


 

Other data sheets are available within the file: 74HC123D, 74HC123DB, 74HC123N, 74HC123PW

Related articles across the web