Part Number: AD8129
Function: Low Cost, 270 MHz, Differential Receiver Amplifier
Package: 8-Lead Lead Frame Chip Scale Package [LFCSP] Type
Manufacturer: Analog Devices
Pinouts:
Description
The AD8129 / AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the AD8131or AD8132drivers. Either can be used for analog or digital video signals and for high speed data transmission.
The AD8129/AD8130 are differential-to-single-ended amplifiers with extremely high CMRR at high frequency. Therefore, they can also be effectively used as high speed instrumentation amps or for converting differential signals to single-ended signals. The AD8129 is a low noise, high gain (10 or greater) version intended for applications over very long cables, where signal attenuation is significant.
The AD8130 is stable at a gain of 1 and can be used for applications where lower gains are required. Both have user-adjustable gain to help compensate for losses in the transmission line. The gain is set by the ratio of two resistor values. The AD8129/AD8130 have very high input impedance on both inputs, regardless of the gain setting.
Features
– High speed
(1) AD8130: 270 MHz, 1090 V/μs @ G = +1
(2) AD8129: 200 MHz, 1060 V/μs @ G = +10
– High CMRR
(1) 94 dB min, dc to 100 kHz
(2) 80 dB min @ 2 MHz
(3) 70 dB @ 10 MHz
– High input impedance: 1 MΩ differential
– Input common-mode range ±10.5 V
– Low noise
(1) AD8130: 12.5 nV/√Hz
(2) AD8129: 4.5 nV/√Hz
– Low distortion, 1 V p-p @ 5 MHz
(1) AD8130, −79 dBc worst harmonic @ 5 MHz
(2) AD8129, −74 dBc worst harmonic @ 5 MHz
– User-adjustable gain
– No external components for G = +1
– Power supply range +4.5 V to ±12.6 V
– Power-down
Applications
– High speed differential line receivers
– Differential-to-single-ended converters
– High speed instrumentation amps
– Level shifting
Other data sheets are available within the file:
AD8129AR, AD8129AR-REEL, AD8129AR-REEL7, AD8129ARM
AD8129 Datasheet PDF Download
