ATC9501 Datasheet – SOP 8, Power Supply Control IC – Anachip

Part Number: ATC9501

Function: Power Supply Control IC

Package:  SOP 8 Pin type

Manufacturer: Anichip, Txpower( Http://www.jdsemi.cn )

Image

ATC9501 Power Supply Control IC Anachip

 

Description

The ATC9501 is suitable for low cost, high precision constant current (CC / CV) applications. Constant current constant voltage ring without optocoupler, TL431 and compensation circuit, the internal integration of 900V power tube, reducing system cost.

ATC9501 can meet the output voltage ± 5% of the production accuracy. Very low start-up current, quasi-valley detection can easily meet EPA2.0 energy efficiency requirements. Output voltage compensation cable can be adjusted according to customer requirements, greatly facilitate the customer’s system design.

ATC9501 also integrates a variety of protection features: undervoltage lockout, leading edge blanking, overvoltage protection, overcurrent protection, loop open circuit protection, output short circuit protection, greatly increasing the stability of the system.

Pinout

ATC9501 datasheet pinout

Features

1. Constant – voltage (CV) and constant – current (CC) control of primary – side feedback
2. 3% of the constant voltage accuracy, 2% of the constant current accuracy
3. Energy saving mode: Pulse frequency modulation control mode (PFM)
4. Built-in 900V power switch
5. Built-in jitter reduces EMI
6. Cycle-by-cycle current limit
7. Built-in soft start
8. Low starting current (5uA)
9. Feedback overvoltage protection (OVP)
10. Undervoltage Lockout (UVLO)
11. Over-temperature protection (OTP)
12. Output short circuit protection
13. Feedback loop open circuit protection
14. Adjustable output line compensation voltage

 

ATC9501 Datasheet

 

Related articles across the web