PJ99 PDF Datasheet – 40V, Junction Field-Effect Transistor

Part Number: PJ99

Function: Silicon Junction Field-Effect Transistor

Die Size : 0.012″ x 0.012″

Manufacturer: InterFET Corporation ( www.interfet.com )

Images:PJ99 pdf transistor

Description

This is 40V, Silicon Junction Field-Effect Transistor. A Junction Field-Effect Transistor (JFET) is a type of field-effect transistor (FET) that is primarily used for electronic switching and amplification of electrical signals. JFETs belong to the family of unipolar transistors, meaning they rely on the movement of charge carriers of one polarity (either electrons or holes) for their operation.

1. Three Terminals: A JFET has three terminals: the source (S), the drain (D), and the gate (G). The gate terminal controls the flow of charge carriers between the source and drain.

2. Voltage-Controlled: JFETs are voltage-controlled devices, which means that the voltage applied to the gate terminal modulates the flow of current between the source and drain terminals. This control is achieved through the electric field created by the voltage on the gate.

Features

1. General Purpose Amplifier

2.  Analog Switch Absolute

Maximum ratings at TA = 25¡C Gate Current, Ig Operating Junction Temperature, Tj Storage Temperature, Ts 10 mA +150°C – 65°C to +175°C G S-D S-D G Die Size = 0.021″ X 0.021″ All Bond Pads = 0.004″ Sq. Substrate is also Gate. Devices in this Databook based on the PJ99 Process. Datasheet 2N3993, 2N3993A 2N3994, 2N3994A 2N5114, 2N5115 2N5116 2SJ44 IFN5114, IFN5115 IFN5116 Datasheet IFP44 J174, J175 J176, J177 P1086, P1087 VCR3P At 25°C free air temperature: Static Electrical Characteristics Gate Source Breakdown Voltage Reverse Gate Leakage Current Drain Saturation Current (Pulsed) Gate Source Cutoff Voltage Dynamic Electrical Characteristics Drain Source ON Resistance Forward Transconductance Input Capacitance Feedback Capacitance Equivalent Noise Voltage Turn On Delay Time Rise Time Turn Off Delay Time Fall Time rds(on) gfs […]

PJ99 datasheet

PJ99 PDF Datasheet

OZ9936GN PDF Datasheet – LCD CCFL Inverter Controller

An LCD CCFL (Cold Cathode Fluorescent Lamp) inverter controller is a component used in older LCD (Liquid Crystal Display) monitors and televisions that employ CCFL backlighting technology. CCFLs are gas-discharge lamps that were commonly used to provide backlight illumination in LCD screens before the widespread adoption of LED (Light Emitting Diode) backlighting.

Part Number: OZ9936GN

Function: LCD Monitor CCFL Inverter Controller

Package: SOIC 8 Pin Type

Manufacturer: O2Micro

Images:

OZ9936GN datasheet pdf

Description

The patent pending OZ9936GN is a cost-effective CCFL (Cold Cathode Fluorescent Lamp) Power
Management controller designed for driving CCFLs in Liquid Crystal Display (LCD) applications.

The OZ9936 provides two drive signals for most power conversion topologies, such as push-pull,
half-bridge, full-bridge or Class-D inverters while maintaining high-efficiency operation. The highly
integrated controller provides current and voltage regulation, soft-start operation, over-voltage
protection and an external enabling function while maintaining a high-degree of design flexibility.
The application requires a minimum number of off-the-shelf components. […]

Pinouts:

OZ9936GN pinout

Features

• Built-in intelligence to ignite positive impedance CCFLs

• Low cost LCD monitor inverter solution

• Constant operating frequency

• Built-in intelligence for ignition and normal operation of CCFLs

• Built-in open-lamp protection and over-voltage protection

• Optimized soft-start function

• Supports both analog and external PWM dimming control

Other data sheets are available within the file: 0Z9936GN, OZ9936, 0Z9936, OZ9936G,

OZ9936D, OZ9936DN

 

OZ9936GN PDF Datasheet