F13NK50Z PDF Datasheet – 500V, 11A, Power MOSFET – ST

This post explains for the MOSFET.

The Part Number is F13NK50Z, STF13NK50Z.

The function of this semiconductor is 500V, 11A, Power MOSFET.

The package is TO-220, TO-220FP, TO-247 Type.

Manufacturer: STMicroelectronics

Preview images :

1 page
F13NK50Z pdf pinout

Description

The SuperMESH series is obtained through an extreme optimization of ST’s well established
strip-based PowerMESH™ layout. In addition to pushing on-resistance significantly down, special
care is taken to ensure a very good dv/dt capability for the most demanding applications.
Such series complements ST full range of high voltage MOSFETs.

 

F13NK50Z datasheet mosfet

Features

1. Extremely high dv/dt capability

2. 100% avalanche tested

3. Gate charge minimized

4. Very low intrinsic capacitances

5. Very good manufacturing repeatability

Applications:

1. Switching application

2. N-channel MOSFETs are often used in power management circuits and battery protection circuits.

F13NK50Z PDF Datasheet

DS2501 PDF Datasheet – 512-bit Add-Only Memory

This post explains for the Add-Only Memory.

The Part Number is DS2501.

The function of this semiconductor is UniqueWare Add only memory.

The package is TO-92 Type

Manufacturer: Dallas Semiconductor ( Maxim )

Preview images :

DS2501 pdf

Description

The DS2501 512-bit add-only memory identifies and stores relevant information about the product to which it is associated. This lot- or product-specific information can be accessed with minimal interface-for example, a single port pin of a microcontroller. The DS2501 consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit family code (11h) plus 512 bits of EPROM that is user-programmable.

It is a 512Kb add-only memory, often referred to as a 1-Wire EEPROM (Electrically Erasable Programmable Read-Only Memory). The 1-Wire protocol is a communication protocol developed by Dallas Semiconductor (now a part of Maxim Integrated) that allows for communication with devices over a single data line.

Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return. The entire device can be programmed and then write-protected if desired. Alternatively, the part may be programmed multiple times with new data being appended to, but not overwriting, existing data with each subsequent programming of the device.[…]

 

DS2501 to-92 dallas maxim

Features:

. 512 bits Electrically Programmable Read Only Memory (EPROM) communicates with the economy of one signal plus ground

. Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike

. Built-in multidrop controller ensures compatibility with other MicroLAN products

. EPROM partitioned into two 256-bit pages for randomly accessing packetized data

. Each memory page can be permanently write-protected to prevent tampering

. Device is an “add-only” memory where additional data can be programmed into EPROM without disturbing existing data

. Architecture allows software to patch data by superseding an old page in favor of a newly programmed page

. Reduces control, address, data, power, and programming signals to a single data pin

. Directly connects to a single port pin of a microprocessor and communicates at up to 16.3 kbps

. 8-bit family code specifies DS2501 communications requirements to reader

Download DS2501 Datasheet

DS2501 pdf