KLMAG2WEPD-B031 PDF – eMMC ( NAND Flash Memory ) 

Part Number: KLMAG2WEPD-B031

Function: 16GB, eMMC ( Managed NAND Flash Memory )

Package: 153FBGA Type ( 11.5mm x 13mm x 0.8mm )

Manufacturer: Samsung

Images:KLMAG2WEPD-B031 pdf datasheet

Description

KLMAG2WEPD-B031 is 16GB, eMMC. The term “embedded MMC” (eMMC) refers to an embedded form of MultiMediaCard (MMC) flash memory, which is commonly used in electronic devices such as smartphones, tablets, digital cameras, and other portable devices. eMMC combines the MMC interface with NAND flash memory to provide non-volatile storage in a compact, soldered-on package.

SAMSUNG e·MMC is an embedded MMC solution designed in a BGA package form. e·MMC operation is identical to a MMC device and therefore is a simple read and write to memory using MMC protocol v5.0 which is a industry standard.

e·MMC consists of NAND flash and a MMC controller. 3V supply voltage is required for the NAND area (VDDF or VCC) whereas 1.8V or 3V dual supply voltage (VDD or VCCQ) is supported for the MMC controller. SAMSUNG e•MMC supports 200MHz DDR – up to 400MBps with bus widths of 8 bit in order to improve sequential bandwidth, especially sequential read performance.

There are several advantages of using e·MMC. It is easy to use as the MMC interface allows easy integration with any microprocessor with MMC host. Any revision or amendment of NAND is invisible to the host as the embedded MMC controller insulates NAND technology from the host. This leads to
faster product development as well as faster times to market. The embedded flash management software or FTL(Flash Transition Layer) of e·MMC manages Wear Leveling, Bad Block Management and ECC. The FTL supports all features of the Samsung NAND flash and achieves optimal performance.

Pinouts:

KLMAG2WEPD-B031 pinout memory

Features

1. embedded MultiMediaCard Ver. 5.0 compatible. Detail description is referenced by JEDEC Standard

2. SAMSUNG e·MMC supports features of eMMC5.0 which are defined in JEDEC Standard

– Supported Features : Packed command, Cache, Discard, Sanitize, Power Off Notification, Data Tag,
Partition types, Context ID, Real Time Clock, Dynamic Device Capacity, HS200

– Non-supported Features : Large Sector Size (4KB)

3. Additional features of eMMC5.0 : HS400 mode (200MHz DDR – up to 400Mbps), Field Firmware Update, Device Health Report, Sleep Notification, Secure Removal Type

4. Full backward compatibility with previous MultiMediaCard system specification (1bit data bus, multi-e·MMC systems)

5. Data bus width : 1bit (Default), 4bit and 8bit

KLMAG2WEPD-B031 PDF Datasheet

VIPER22A PDF – OFF LINE SMPS PRIMARY SWITCHER

The VIPER22A is a popular offline PWM (Pulse Width Modulation) controller IC designed for offline power supply applications. It is manufactured by STMicroelectronics and is commonly used in low-power switch-mode power supplies. This IC is commonly used in applications such as AC-DC power supplies, auxiliary power supplies, LED lighting, and battery chargers.

The Part Number is VIPER22A.

The function of this semiconductor is LOW POWER OFF LINE SMPS PRIMARY SWITCHER.

The package is DIP or SO 8 Pin type

Manufacturer: STMicroelectronics

Preview images :VIPER22A pdf

Description

An offline SMPS (Switched-Mode Power Supply) primary switcher refers to a power supply circuit or IC that operates directly from the AC mains input (offline) and serves as the primary-side switcher in the SMPS topology. The primary switcher is responsible for regulating the energy flow from the input to the output of the power supply.

The primary switcher in an offline SMPS typically uses a high-voltage power transistor or a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) to perform the switching operation. It operates at high frequencies to minimize the size and weight of the transformer and other passive components.

The VIPER22A combines a dedicated current mode PWM controller with a high voltage Power
MOSFET on the same silicon chip. Typical applications cover off line power supplies for
battery charger adapters, standby power supplies for TV or monitors, auxiliary supplies for motor
control, etc. The internal control circuit offers the following benefits:

(1) Large input voltage range on the VDD pin accommodates changes in auxiliary supply
voltage. This feature is well adapted to battery charger adapter configurations.

(2) Automatic burst mode in low load condition.

(3) Overvoltage protection in hiccup mode. […]

Features:

. FIXED 60 KHZ SWITCHING FREQUENCY

. 9V TO 38V WIDE RANGE VDD VOLTAGE

. CURRENT MODE CONTROL

. AUXILIARY UNDERVOLTAGE LOCKOUT WITH HYSTERESIS

. HIGH VOLTAGE START UP CURRENT SOURCE

. OVERTEMPERATURE, OVERCURRENT AND OVERVOLTAGE PROTECTIO

. WITH AUTORESTART

VIPER22A pinout datasheet

VIPER22A Datasheet