Part Number: KLMAG2WEPD-B031
Function: 16GB, eMMC ( Managed NAND Flash Memory )
Package: 153FBGA Type ( 11.5mm x 13mm x 0.8mm )
Manufacturer: Samsung
Images:
Description
KLMAG2WEPD-B031 is 16GB, eMMC. The term “embedded MMC” (eMMC) refers to an embedded form of MultiMediaCard (MMC) flash memory, which is commonly used in electronic devices such as smartphones, tablets, digital cameras, and other portable devices. eMMC combines the MMC interface with NAND flash memory to provide non-volatile storage in a compact, soldered-on package.
SAMSUNG e·MMC is an embedded MMC solution designed in a BGA package form. e·MMC operation is identical to a MMC device and therefore is a simple read and write to memory using MMC protocol v5.0 which is a industry standard.
e·MMC consists of NAND flash and a MMC controller. 3V supply voltage is required for the NAND area (VDDF or VCC) whereas 1.8V or 3V dual supply voltage (VDD or VCCQ) is supported for the MMC controller. SAMSUNG e•MMC supports 200MHz DDR – up to 400MBps with bus widths of 8 bit in order to improve sequential bandwidth, especially sequential read performance.
There are several advantages of using e·MMC. It is easy to use as the MMC interface allows easy integration with any microprocessor with MMC host. Any revision or amendment of NAND is invisible to the host as the embedded MMC controller insulates NAND technology from the host. This leads to
faster product development as well as faster times to market. The embedded flash management software or FTL(Flash Transition Layer) of e·MMC manages Wear Leveling, Bad Block Management and ECC. The FTL supports all features of the Samsung NAND flash and achieves optimal performance.
Pinouts:
Features
1. embedded MultiMediaCard Ver. 5.0 compatible. Detail description is referenced by JEDEC Standard
2. SAMSUNG e·MMC supports features of eMMC5.0 which are defined in JEDEC Standard
– Supported Features : Packed command, Cache, Discard, Sanitize, Power Off Notification, Data Tag,
Partition types, Context ID, Real Time Clock, Dynamic Device Capacity, HS200
– Non-supported Features : Large Sector Size (4KB)
3. Additional features of eMMC5.0 : HS400 mode (200MHz DDR – up to 400Mbps), Field Firmware Update, Device Health Report, Sleep Notification, Secure Removal Type
4. Full backward compatibility with previous MultiMediaCard system specification (1bit data bus, multi-e·MMC systems)
5. Data bus width : 1bit (Default), 4bit and 8bit
KLMAG2WEPD-B031 PDF Datasheet
