A6832 PDF – 32-Bit Serial Input Latched Sink Driver

The Part Number is A6832.

The function of this semiconductor is DABiC-5 32-Bit Serial Input Latched Sink Drivers.

The package is PLCC 44 Pin Type

Manufacturer: Allegro MicroSystems

Preview images :

A6832 pinout datasheet

Description

Intended originally to drive thermal printheads, the A6832 has been optimized for low output-saturation voltage, high-speed operation, and pin configurations that are the most convenient
for the tight space requirements of high-resolution printheads.

These integrated circuits can also be used to drive multiplexed LED displays or incandescent lamps at up to 125 mA peak current. The combination of bipolar and MOS technologies gives the A6832 arrays an interface flexibility beyond the reach of standard buffers and power driver circuits.

The devices each have 32 bipolar NPN open-collector saturated drivers, a CMOS data latch for each of the drivers, two 16-bit CMOS shift registers, and CMOS control circuitry. The highspeed CMOS shift registers and latches allow operation with most microprocessor-based systems. Use of these drivers with TTL may require input pull-up resistors to ensure an input logic high. MOS serial data outputs permit cascading for interface applications requiring additional drive lines. […]

Features and Benefits
▪ 3.3 to 5 V logic supply range
▪ To 10 MHz data input rate
▪ Schmitt trigger inputs for improved noise immunity
▪ Low-power CMOS logic and latches
▪ 40 V current sink outputs
▪ Low saturation voltage

A6832 pdf

Applications:

▪ Thermal printheads
▪ Multiplexed LED displays
▪ Incandescent lamps

A6832 PDF Datasheet

3TK2804 PDF Datasheet – Contactor Safety Combination

This post explains for the Contactor.

The Part Number is 3TK2804.

The function of this semiconductor is Contactor Safety Combination.

Manufacturer: Siemens

Preview images:3TK2804 pdf datasheet

Description

3TK2804 IS CONTACTOR COMBINATION FOR SAFETY CIRCUITS ENABLING AND SIGNALLING CIRCUIT. ( 4NO, 1NO+1NC DC OPERATION DC 24V )

A contactor is an electrical switching device that is used to control the flow of electricity in an electric circuit. It is an electromagnetic relay with high current capacity, typically used to switch heavy loads in industrial and commercial applications. Contactors are designed to handle large electrical currents and are commonly used to control electric motors, heating elements, lighting systems, and other high-power devices.

1. Switching High Currents: Contactors are designed to handle high electrical currents, making them suitable for controlling devices that require a lot of power, such as electric motors used in industrial machinery.

2. Electromagnetic Operation: Contactors use an electromagnetic coil to control the opening and closing of electrical contacts. When an electric current is applied to the coil, it generates a magnetic field that attracts a movable armature, closing the contacts and allowing current to flow through.

 

Functions and connections:

The internal control circuit of the contactor safety combination is designed according to DIN EN 60204, Part 1 (VDE 0113, Part 1), para. 9.4.2.2, so that in the case of a fault in one of the contactor relays the function of the safety circuit is maintained.

The supply voltage must meet the requirements of the DIN EN 60204 (VDE 0113, Part 1) (the terminals “L-/N; A2“ must be connected to that side of the control current circuit which is linked to the protective
conductor system).

Applications:

The contactor safety combinations can be used in EMERGENCY-OFF circuits and for monitoring protective devices (e.g. protective screens).

 

Other data sheets are available within the file: 3TK2804-0BB4

3TK2804 PDF Datasheet

Related articles across the web