uP7704 PDF Datasheet – 2A, Low Dropout Linear Regulator

Part Number: uP7704, uP7704U8, uP7704ADDA

Function: 2A Ultra Low Dropout Linear Regulator

Package: PSOP-8, WDFN3x3-10L Type

Manufacturer: uPI Semiconductor

Images:uP7704 pinout pdf

Description

The uP7704 is a 2A ultra low dropout linear regulator specifically designed for motherboard, notebook and graphic card applications. This device works with dual supplies, a control input for the control circuitry and a power input as low as 1.2V for providing current to output. The uP7704
delivers high-current and ultra-low-drop output voltage as low as 0.8V for applications where VOUT is very close to VIN.

Features

1. Works with 1.2V~5.5V VIN

(1) Adjustable Output Voltage, Down to 0.8V

(2) 1.5% Initial Accuracy

(3) Excellent Line and Load Regulation

2. 2A Guaranteed Output Current

(1) 300mV @ 2A Dropout Voltage

3. Very Low On-Resistance : 150mΩ typical

4. VOUT Pull Low Resistance when Disabled

5. VOUT Power OK Signal

6. Fast Transient Response

Block Diagram:

uP7704 datasheet

Applications:

1. Desktop PCs, Notebooks, and Workstations

2. Graphic Cards

3. Low Voltage Logic Supplies

4. Microprocessor and Chipset Supplies

5. Split Plane Microprocessor Supplies

6. Advanced Graphics Cards Supplies

7. SoundCards and Auxiliary Power Supplies

uP7704 PDF Datasheet

TIC226A PDF Datasheet – 100V, 8A, Triode Thyristor

Part Number: TIC226A

Function: 100V, 8A, SILICON BIDIRECTIONAL TRIODE THYRISTOR

Package: TO-220 Type

Manufacturer: Comset Semiconductor

Images:TIC226A pdf thyristor

Description

TIC226A is a bidirectional triode thyristor (triac) which may be triggered from the off-state
to the on-state by either polarity of gate signal with main Terminal 2 at either polarity. […]

A bidirectional triode thyristor, often referred to as a TRIAC (short for TRIode for Alternating Current), is a semiconductor device used in AC power control applications. It is a member of the thyristor family and is designed to control the flow of current in both directions through a load when triggered.

1. Bidirectional Conduction: Unlike some other thyristors (such as SCRs or silicon-controlled rectifiers), a TRIAC can conduct current in both directions when it is triggered. It can switch and control AC power by allowing current to flow in either the positive or negative half-cycles of the alternating current waveform.

2. Three Terminals: TRIACs typically have three terminals: MT1 (Main Terminal 1), MT2 (Main Terminal 2), and G (Gate). MT1 and MT2 are the main terminals through which the load is connected, and the G terminal is used to trigger or control the TRIAC.

3. Triggering: The gate (G) terminal is used to apply a small triggering current to the TRIAC. When the gate current exceeds the gate threshold, the TRIAC turns on and conducts current. The TRIAC turns off automatically when the current through it falls below the holding current level or when the polarity of the applied voltage reverses.

Features

1. 8 A RMS

2. 70 A Peak

3. Glass Passivated Wafer

4. 100 V to 800 V Off-State Voltage

5. Max IGT of 50 mA (Quadrants 1-3)

6. High-temperature, High-current and high-voltage applications

 

Other data sheets are available within the file:

TIC226B, TIC226C, TIC226D, TIC226E, TIC226M, TIC226N, TIC226S

 

TIC226A PDF Datasheet

Related articles across the web