LM356 PDF – LOW Voltage Audio Power Amplifier

Part Number: LM356

Function: LOW Voltage Audio Power Amplifier

Package: DIP, SOP 8 Pin Type

Manufacturer: FCI

Images:LM356 pdf pinout

Description

An audio power amplifier is an electronic device that increases the amplitude of an audio signal to drive a loudspeaker or other types of audio output devices. Its primary purpose is to take a low-power audio signal from a source, such as a microphone, CD player, or audio processor, and boost it to a level sufficient to drive speakers and produce audible sound.

Here are some key points:

1. Amplification: The main function of a power amplifier is to amplify the audio signal while maintaining its fidelity. This means that it should increase the voltage or current of the signal without introducing significant distortion or noise.

2. Signal Types: Audio power amplifiers typically handle analog audio signals, which can be in the form of voltage or current. They are commonly used in various audio systems, including home stereo systems, car audio systems, public address (PA) systems, and professional audio equipment.

The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value up to 200.

The inputs are ground referenced while the ouput is automatically biased to one half the supply voltage.

 

Features

1. Battery operation

2. Minum external parts

3. Low quiescent current drain 4mA

4. Ground referenced input

LM356 datasheet

Applications:

1. AM-FM radio amplifier

2. TV sound systems

3. Ultrasonic drivers

4. Power inverters.

LM356 PDF Datasheet

LA1201 PDF Datasheet – FM / AM IF IC – Sanyo

Part Number: LA1201

Function: FM / AM IF Amplifier

Package: DIP 14 Pin

Manufacturer: Sanyo Semiconductor

Images:

LA1201 datasheet pdf

 

Description

LA1201 is FM / AM IF Amplifier. An FM/AM IF (Intermediate Frequency) Amplifier is an electronic circuit commonly used in FM (Frequency Modulation) and AM (Amplitude Modulation) radio receivers. Its primary function is to amplify the intermediate frequency signals that are generated during the signal processing stages of a radio receiver.

Here are some key points:

1. IF Stage in Radio Receivers: In a radio receiver, the incoming radio frequency (RF) signal is first converted to an intermediate frequency (IF) signal before further processing. This conversion helps improve selectivity, reduce interference, and simplify the design of the receiver.

2. Frequency Modulation (FM) and Amplitude Modulation (AM): Radio receivers can handle both FM and AM signals. The IF amplifier stage is a common component in both types of receivers, as it’s part of the signal processing chain after the initial RF amplification.

3. IF Amplification: The IF amplifier’s main task is to amplify the weak IF signal to a level suitable for detection and demodulation. Amplification is necessary to overcome signal losses and ensure that the demodulator (for FM or AM) can accurately extract the audio or data signal.

Pinouts:

LA1201 pinout

LA1201 PDF Datasheet

Related articles across the web