ACS712 PDF Datasheet – Linear Current Sensor

Part Number: ACS712

Function: Fully Integrated / Hall Effect-Based Linear Current Sensor

Package: SOIC 8 Pin Type

Manufacturer: Allegro MicroSystems

Images:ACS712 pinout datasheet

Description

The Allegro ACS712 provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection.

The device is not intended for automotive applications. The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer.
A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.

ACS712 pdf

Features and Benefits:

▪ Low-noise analog signal path ▪ Device bandwidth is set via the new FILTER pin ▪ 5 μs output rise time in response to step input current ▪ 80 kHz bandwidth ▪ Total output error 1.5% at TA= 25°C ▪ Small footprint, low-profile SOIC8 package ▪ 1.2 mΩ internal conductor resistance ▪ 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 ▪ 5.0 V, single supply operation ▪ 66 to 185 mV/A output sensitivity ▪ Output voltage proportional to AC or DC currents ▪ Factory-trimmed for accuracy ▪ Extremely stable output offset voltage ▪ Nearly zero magnetic hysteresis ▪ Ratiometric output from supply voltage

[…]

ACS712 pdf

ACS712 PDF Datasheet

4407A PDF Datasheet – AO4407A (30V, P-Ch, MOSFET)

Part Number: 4407A, AO4407A

Function: 30V, P-Channel MOSFET

Package: SOP 8 Pin Type

Manufacturer: Alpha & Omega Semiconductors

Images:4407A pdf pinout

Description

This is 30V, P-Channel MOSFET. The 4407A uses advanced trench technology to provide excellent RDS(ON), and ultra-low low gate charge with a 25V gate rating. This device is suitable for use as a load switch or in PWM applications.

Features

1. VDS = -30V

2. ID = -12A (VGS = -20V)

(1) RDS(ON) < 11mΩ (VGS = -20V)

(2) RDS(ON) < 13mΩ (VGS = -10V)

(3) RDS(ON) < 17mΩ (VGS = -6V)

 

4407A datasheet mosfet

Absolute Maximum Ratings (Ta = 25°C)

1. Drain to source voltage: VDSS = – 30 V

2. Gate to source voltage: VGSS = ± 25 V

3. Drain current: ID = – 12 A

4. Total Power Dissipation: Pd = 3.1 W

5. Avalanche energy: Ear = 101 mJ

6. Channel temperature: Tch = 150 °C

7. Storage temperature: Tstg = -55 to +150 °C

4407A PDF Datasheet