MX25L25635F PDF – 256Mbit FLASH MEMORY

Part Number: MX25L25635F

Function: 256Mb bit, Serial Flash Memory

Package: SOP 16 Pin, WSON 8 Pin Type

Manufacturer: MACRONIX

Images:MX25L25635F pdf memory

Description

MX25L25635F is 256Mb bits serial Flash memory, which is configured as 33,554,432 x 8 internally. When it is in two or four I/O mode, the structure becomes 134,217,728 bits x 2 or 67,108,864 bits x 4. The feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus while it is in single I/O mode. The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access to the device is enabled by CS# input.

After program/erase command is issued, auto program/ erase algorithms which program/ erase and verify the specified page or sector/block locations will be executed. Program command is executed on byte basis, or page (256 bytes) basis, or word basis for erase command is executed on sector (4K-byte), block (32K-byte), or block (64K-byte), or whole chip basis.

To provide user with ease of interface, a status register is included to indicate the status of the chip.  The status read command can be issued to detect completion status of a program or erase operation via WIP bit.

Pinouts:

MX25L25635F pinout datasheet

• Valid command length checking: The command length will be checked whether it is at byte base and completed on byte boundary.

• Write Enable (WREN) command: WREN command is required to set the Write Enable Latch bit (WEL) before other command to change data.

• Deep Power Down Mode: By entering deep power down mode, the flash device also is under protected from writing all commands except Release from deep power down mode command (RDP) and Read Electronic Signature command (RES), and softreset command.

Features:

• Supports Serial Peripheral Interface — Mode 0 and Mode 3

• Single Power Supply Operation
– 2.7 to 3.6 volt for read, erase, and program operations

• 256Mb: 268,435,456 x 1 bit structure or 134,217,728 x 2 bits (two I/O mode) structure or 67,108,864 x 4 bits (four I/O mode) structure

• Protocol Support
– Single I/O, Dual I/O and Quad I/O

• Latch-up protected to 100mA from -1V to Vcc +1V

 

MX25L25635F PDF Datasheet

LTN156AT01-H01 PDF – 15.6 Inch, Display Module

TFT LCD (Thin-Film Transistor Liquid Crystal Display) module is a type of flat-panel display that uses thin-film transistor technology to improve the image quality and response time of traditional LCDs. TFT LCD modules consist of a layer of liquid crystal material sandwiched between two sheets of glass or plastic substrates, with each pixel controlled by its own thin-film transistor.

TFT LCD modules are widely used in various electronic devices such as smartphones, tablets, laptops, gaming devices, and automotive displays because they offer high resolution, high contrast, and fast refresh rates.

Part Number: LTN156AT01-H01

Function: 15.6 Inch, Display Module

Display area : 344.232(H) x 193.536(V) (mm)

Manufacturer: Samsung

Images:LTN156AT01-H01 pdf lcd

Description

LTN156AT01 is a color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as switching devices. This model is composed of a TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 15.6″ contains 1366 x 768 pixels and can display up to 262,144 colors. 6 O’clock direction is the optimum viewing angle.

1. Absolute Maximum Ratings 1.1 Environmental Absolute Ratings 1.2 Electrical Absolute Ratings 2. Optical Characteristics 3. Electrical Characteristics 3.1 TFT LCD Module 3.2 Back-light Unit 4. Block Diagram 4.1 TFT LCD Module 4.2 Backlight Unit 5. Input Terminal Pin Assignment 5.1 Input Signal & Power 5.2 LVDS Interface 5.3 Timing Diagrams of LVDS For Transmitting 5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color. 5.5 Pixel format in the Display 6. Interface Timing 6.1 Timing Parameters 6.2 Timing Diagrams of interface Signal 6.3 Power ON/OFF Sequence 7. Mechanical Outline Dimension 8. Packing 9. Markings & Others 10. General Precautionso.

LTN156AT01-H01 datasheet

Features

• Thin and light weight
• High contrast ratio, high aperture structure
• 1366 x 768 pixels resolution (16:9)
• Fast Response Time
• Low power consumption
• DE (Data enable) only mode
• 3.3V LVDS Interface
• On board EDID chip
• Pb-free product
• RoHS compliance

 

Applications:

• Notebook PC
• If the usage of this product is not for PC application, but for others, please contact SEC

LTN156AT01-H01 PDF Datasheet