HY-SRF05 PDF – Ultrasonic Distance Sensor ( Manual )

An ultrasonic distance sensor, often referred to as an ultrasonic rangefinder or ultrasonic distance measurement module, is a sensor device that measures the distance between the sensor and an object by emitting ultrasonic sound waves and measuring the time it takes for the sound waves to bounce back (echo) after hitting the object.

Part Number: HY-SRF05

Function: Ultrasonic Distance Sensor

Manufacturer: ETC

Images:HY-SRF05 pdf sensor

 

Description

Ultrasonic ranging module HY-SRF05 provides 2cm – 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The module includes transmitters, receiver and control circuit.

The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce costs still further. As such, the SRF05 is fully compatible with the SRF04. Range is increased from 3 meters to 4 meters. A new operating mode (tying the mode pin to ground) allows the SRF05 to use a single pin for both trigger and echo, thereby saving valuable pins on your controller. When the mode pin is left unconnected, the SRF05 operates with separate trigger and echo pins, like the SRF04.

The ultrasonic sensor measures the distance of the nearest object, sending the result to the serial port. It can work from 2 cm to 3 m. It measures the time spent by the signal to reach the object and return to the sensor.

Connections:

Vcc -> 5 V
Trig -> pin 13 (digital pin)
Echo -> pin 12 (digital pin)
Out ->
GND -> GND

 

HY-SRF05 datasheet

Specifications

1. Trigger Pin Format : 10 uS digital pulse

2. Sound Frequency : 40 kHz

3. Echo Pin Output : 0-Vcc

4 Measurement Range : 2cm to ~4.5m

5 Measurement Resolution : 0.3cm

6. Measurement Angle : up to 15 deg

7. Measurement Rate : 40 Hz

8. Supply Voltage : 4.5V to 5.5V

9. Supply Current : 10 to 40mA

10. Connector : standard 5-pin male connector which can plug directly into breadboards.

11. Static current : less than 2mA

12 Detection distance : 2cm-450cm

HY-SRF05 PDF Datasheet

RJH3047 PDF – 50A, 330V, N-Channel IGBT

Part Number: RJH3047

Function: 50A, 330V, Silicon N-Channel IGBT

Manufacturer: ETC

Images:RJH3047 datasheet pinout

Description

An N-Channel IGBT (Insulated Gate Bipolar Transistor) is a type of power semiconductor device that combines the characteristics of both a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) and a bipolar junction transistor (BJT). It is commonly used in power electronics and high-voltage applications where efficient and fast switching of high currents is required.

Features and characteristics:

1. Structure: The N-Channel IGBT consists of three main layers: the N+ substrate (collector), the P layer (drift region), and the N- layer (emitter). The P layer acts as the gate-controlled base region, and the N- layer serves as the channel.

2. Voltage Rating: N-Channel IGBTs are available in various voltage ratings, typically ranging from several hundred volts up to several kilovolts. The voltage rating determines the maximum voltage that the device can handle without breakdown.

3. Current Handling: N-Channel IGBTs are designed to handle high current levels. They are commonly used in applications that require switching high currents, such as motor drives, power inverters, and industrial power supplies.

4. Gate Control: Like MOSFETs, IGBTs have a gate terminal that controls the device operation. By applying a voltage to the gate terminal, the IGBT can be turned on or off. However, IGBTs require a higher gate voltage compared to MOSFETs due to the bipolar transistor characteristics.

5. Low On-State Voltage Drop: One of the advantages of IGBTs is their low on-state voltage drop. When the device is conducting, it has a relatively low voltage drop across the collector-emitter junction, resulting in lower power dissipation and higher efficiency.

RJH3047 pdf[…]

Applications:

1. High Speed Power Switching

RJH3047 PDF Datasheet