MP1582 PDF – 2A, 28V, 1.5MHz Step-Down Converter

Part Number: MP1582

Function: 2A, 28V, 1.5MHz, Step-Down Converter

Package: SOIC 8 Pin Type

Manufacturer: MPS ( Monolithic Power Systems )

Images:MP1582 pdf converter

Description

The MP1582 is a high frequency step-down switching regulator with integrated internal high-side, high voltage power MOSFET. It provides 2A output with current mode control for fast loop response and easy compensation. The wide 4.5V to 28V input range accommodates a variety of step-down applications, including those in automotive systems.

A 100µA operational quiescent current allows use in battery-powered applications. High power conversion efficiency over a wide load range is achieved by scaling down the switching frequency at light load condition to reduce the switching and gate driving losses.

Features

•  Wide 4.5V to 28V Operating Input Range

• Programmable Switching Frequency up to 1.5MHz

• High-Efficiency Pulse Skipping Mode for Light Loads

• Ceramic Capacitor Stable

• Internal Soft-Start

• Precision Current Limit without a Current Sensing Resistor

• Up to 95% Efficiency

Pinouts:

MP1582 pinout datasheet

Applications:

• Game Machines

• Automotive Systems

• Industrial Power Systems

• Distributed Power Systems

• Printer Systems

• Battery Powered Systems

MP1582 PDF Datasheet

MP1582 pdf

LB1639 PDF Pinout – Motor Driver – LB1639-CV – 8 Pin

This is a specific integrated circuit (IC) model manufactured by Sanyo (now part of ON Semiconductor). It is a motor driver IC designed for controlling DC motors.

Part Number: LB1639

Function: Motor Driver

Package: DIP 8 Pin Type

Manufacturer: Sanyo

Images:

LB1639 motor driver

 

Description

This is 8 Pin Type, Motor Driver. The LB1639 is low-saturation bidirectional motor driver ICs for use in low-voltage applications.

1. This is capable of driving and controlling DC motors, typically in applications such as robotics, consumer electronics, and automotive systems.

2. The IC features a dual H-bridge configuration, allowing it to control the direction and speed of two DC motors independently. Each H-bridge consists of four power MOSFETs that can drive the motor in forward, reverse, or brake modes.

3. The LB1639 incorporates various protection functions to enhance the reliability and safety of the motor and the IC itself. These protection features include overcurrent protection, thermal shutdown, and undervoltage lockout.

4. The IC supports Pulse Width Modulation (PWM) speed control, enabling precise speed regulation of the DC motors. By adjusting the duty cycle of the PWM signal, the motor speed can be varied.

 

Pinouts:

LB1639 pdf pinout datasheet

Features:

1. Low voltage operation

2. Low saturation voltage (upper transistor + lower transistor residual voltage

3. Low current drain at standby mode

4. Separate logic power supply and motor power supply

5. Brake function

6. Built-in spark killer diodes

LB1639 PDF Datasheet


 

LB1638 PDF Datasheet

Similar features and reference parts

Related articles across the web