C9014 Transistor – 50V, 100mA, NPN ( PDF )

This is one of the NPN transistor types.

Part Number: C9014, 2SC9014

Package: TO-92 Type

Function: 50V, 100mA, NPN Transistor

Manufacturer: USHA India

Image

C9014 datasheet pinout

Description

C9014 transistor refers to a specific type of bipolar junction transistor (BJT) that operates as an NPN (Negative-Positive-Negative) transistor with a voltage rating of 50 volts (V) and a current rating of 100 milliamperes (mA).

1. Voltage Rating: The transistor has a maximum voltage rating of 50V. This means it can handle a maximum voltage of 50V in its operating conditions without the risk of damage.

2. Current Rating: The transistor has a maximum current rating of 100mA. This specifies the maximum continuous current that can flow through the transistor without exceeding its current handling capacity.

Features:

1. High total power dissipation. ( Pt = 450mW )

2. High Hfe and good linearity

3. Complemetary to SS9015

 

C9014 pinout datasheet

NPN transistors are commonly used in electronic circuits for various applications, such as amplification, switching, and signal processing. They can be employed in applications such as audio amplifiers, signal amplifiers, low-power control circuits, and general-purpose switching circuits.

 

Absolute maximum ratings ( Ta=25°C )

1. Collector to Base Voltage: Vcbo = 50 V

2. Collector to Emitter Voltage: Vceo = 45 V

3. Emitter to Base Voltage: Vebo = 5 V

4. Collector Current: Ic = 100 mA

5. Total Dissipation : Pc = 450 mW

6. Junction Temperature: Tj = 150°C

7. Storage Temperature: Tsg = -55 ~ +150°C

 

Applications:

1. Pre-amplifer

2. Low level & Low Noise

 

C9014 PDF Datasheet

C9014 pdf

Related articles across the web

7805 PDF Datasheet – 5V, Voltage Regulator

Part Number: 7805

Function: 5V, Voltage Regulator

Package: TO-220, TO-3 Can type

Manufacturer: National Semiconductor

Image

7805 regulator

 

Description

7805 is 5V, Voltage Regulator. 

The LM78XX series of three terminal regulators is available with several fixed output voltages making them useful in a wide range of applications. One of these is local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow these regulators to be used in logic systems, instrumentation, HiFi, and other solid state electronic equipment. Although designed primarily as fixed voltage regulators these devices can be used with external components to obtain adjustable voltages and currents. The LM78XX series is available in an aluminum TO-3 package which will allow over 1.0A load current if adequate heat sinking is provided. Current limiting is included to limit the peak output current to a safe value.

7805 pinout datasheet

Safe area protection for the output transistor is provided to limit internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shutdown circuit takes over preventing the IC from overheating. Considerable effort was expanded to make the LM78XX series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the out- put, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply. For output voltage other than 5V, 12V and 15V the LM117 series provides an output voltage range from 1.2V to 57V.

7805 block diagram

Features:

1. Output current in excess of 1A

2. Internal thermal overload protection

3. No external components required

4. Output transistor safe area protection

5. Internal short circuit current limit

7805 PDF Datasheet