CJX2-1210 PDF Datasheet – AC Contactor

This post explains for Contactor.

The Part Number is CJX2-1210.

The function of this semiconductor is AC contactor.

Manufacturer: Faryuan

Preview images :

Description

CJX2-1210 is AC Contactor. An AC contactor, also known simply as a contactor, is an electrical switch used to control an electrical circuit. It is specifically designed to handle alternating current (AC) loads. Contactors are commonly used in various applications where remote control of power circuits is necessary, such as in industrial machinery, HVAC systems, lighting control, motor control, and more.

CJX2 AC Contactor( including LC1-D contactor and LC1-F Contactor),it is suitable for using in the circuit up to the rated voltage 1000V AC 50/60 Hz,and three phase,rated voltage 380V,rated current up to 630A.to switch on and off the circuit at a distance.

It is also used as unfrequent start,stop and reversal of AC motor,it is combined into the electromagnetic starter with the thermal relay,combined with the auxiliary contact block,air delayer&machine-interlocking devices,it becomes the delay contactor,mechanical interlocking contactor,star-delta starter,the contactor is produced according to the standard IEC60947-4-1,GB14048.4.

It’s important to note that contactors are different from relays. While both contactors and relays are electromechanical switches, contactors are specifically designed for handling higher current loads associated with industrial applications, while relays are often used for lower-power applications in control circuits.

CJX2-1210 PDF Datasheet

Related articles across the web

BFW11 PDF Datasheet – VHF/UHF Amplifier

This post explains for the amplifier.

The Part Number is BFW11.

The function of this semiconductor is VHF/UHF Amplifier(N-Channel/ Depletion).

The package is TO-72 ( TO-206A ) Type

Manufacturer: Motorola Inc

Preview images :BFW11 pinout datasheet

Description

The BFW11 is VHF/UHF Amplifier.

An N-channel silicon planar epitaxial junction field-effect transistor (JFET) is a specific type of JFET that utilizes N-type silicon material and planar epitaxial fabrication techniques. It is a three-terminal semiconductor device primarily used for low-power amplification and switching applications.

Key features:

1. N-Channel JFET: The transistor employs an N-type channel between the source and drain terminals. It is controlled by a voltage applied to the gate terminal to modulate the current flow through the channel.

2. Silicon Planar Epitaxial Construction: The JFET is constructed using silicon material and planar epitaxial fabrication techniques. Epitaxy refers to the process of growing a thin, single-crystal layer of semiconductor material on top of a substrate, resulting in improved performance characteristics.

3. Voltage-Controlled Device: The N-channel JFET is voltage-controlled, meaning the gate voltage determines the current flow through the channel. Applying a negative voltage to the gate relative to the source reduces the channel conductivity, limiting the current flow.

4. Low Input Impedance: JFETs generally exhibit low input impedance, which means they can present a high load to the signal source. This characteristic can be advantageous in certain applications where the input source has a high output impedance.

Applications:

1. JFET, VHF/UHF Amplifier […]

BFW11 pdf

Absolute Maximum Ratings (Ta = 25°C)

1. Drain to source Voltage: VDSS = 30 V
2. Gate to source Voltage: VGSS = ± 30 V
3. Drain Power Dissipation: Pd = 300 mW
4. Channel temperature: Tch = 150 °C
5. Storage temperature: Tstg = -65 to +150 °C

A VHF/UHF amplifier is an electronic device used to amplify signals in the very high frequency (VHF) and ultra-high frequency (UHF) ranges of the electromagnetic spectrum. VHF covers the frequency range from 30 MHz to 300 MHz, while UHF spans from 300 MHz to 3 GHz.

BFW11 PDF Datasheet