VS1838B PDF Datasheet – Infrared Receiver Module

This post explains for the Infrared Receiver. An infrared (IR) receiver is an electronic device designed to receive and decode infrared signals sent by an IR transmitter. Infrared communication involves sending data through infrared light waves, which are not visible to the human eye but can be detected by specialized electronic components like IR receivers. IR receivers are commonly used in various applications, including remote controls, data transmission, and proximity sensing.

The Part Number is VS1838B.

The function of this semiconductor is Infrared Receiver Module.

Manufacturer: LFN

Preview images :VS1838B pdf pinout

Description

VS1838B contains high-speed and high-sensitivity PIN photodiode and low-power, high-gain preamplifier IC. It adopts epoxy resin package and external shielding and anti-jamming design. This product has passed REACH and SGS certification and is an environmentally friendly product. It is used in infrared remote control systems. used as a receiver.

Features

1. Epoxy resin encapsulation and external shielding anti-drying design

2. Wide working voltage, 2.7-5.5V

3. Low power consumption; wide angle and long distance reception

4. Strong anti-drying ability, can withstand environmental interference

5. The output matches the TTL and CMOS levels, and the low level is valid.

Block Diagram:

VS1838B datasheet

 

Application:

1. Audio-visual equipment (speaker, TV, DVD, satellite receiver, etc.);

2. Home appliances (air conditioners, fans, lighting, etc.);

3. Other infrared remote control products.

[…]

 

VS1838B PDF Datasheet

TB2931HQ PDF Datasheet – 49W BTL x 4ch, Audio Amplifier

This post explains for the audio amplifier.

The Part Number is TB2931HQ.

The function of this semiconductor is 49W BTL x 4ch.

The package is SIP 25 Pin type

Manufacturer: Toshiba

Preview images :TB2931HQ pdf amplifier

Description

A 4-channel BTL (Bridge-Tied Load) amplifier is a type of audio amplifier configuration commonly used in car audio systems and other applications where multiple audio channels need to be amplified.

The Bridge-Tied Load (BTL) configuration allows for increased output power compared to a single-ended amplifier configuration. In a BTL setup, two amplifier channels are combined to drive a load (such as a speaker) in a way that effectively doubles the voltage across the load, resulting in higher power output. This is achieved by using the inverted output of one amplifier channel and combining it with the non-inverted output of another channel.

The TB2931HQ is a power IC with built-in 4-channel BTL amplifier developed for car audio.

The output stage uses DMOS and consists of upper P-ch and lower N-ch pure complementary, realizing a maximum output power POUT = 49 W.

It also incorporates a standby switch, mute function, and various protection circuits necessary for car audio.

Features

1. Low distortion. : THD = 0.01% (standard) (VCC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 Ω)

2. Low noise. : VNO = 50 µVrms (standard)
(VCC = 13.2 V, Rg = 0 Ω, BW = 20 Hz ~ 20 kHz, RL = 4 Ω)

3. Built-in standby switch (4 pin)

4. Built-in muting function (22 pins)

Block Diagram:
TB2931HQ datasheet pinout

TB2931HQ PDF Datasheet

Related articles across the web