Pinout

J6810 PDF Datasheet – 750V, 10A, NPN Transistor, TO-3PF

Posted on by pinout

Part Number: J6810

Function: 750V, 10A, NPN Transistor

Package: TO-3PF Type

Manufacturer: Fairchild Semiconductor

Images:J6810 pdf pinout

Description

The J6810 is 750V, 10A, NPN Triple Diffused Planar Silicon Transistor.

Characteristics of NPN Transistors

1. Forward Biased: In order to operate, the base-emitter junction of an NPN transistor must be forward biased, meaning that the base must be connected to a positive voltage relative to the emitter.

2. High Input Impedance: NPN transistors have a high input impedance, which means that they are less likely to draw current from the input source, and are therefore less likely to cause a drop in voltage across the source.

3. Inverted Output: NPN transistors are known for producing an inverted output relative to their input. That is, if the input signal is high, the output signal will be low, and vice versa. This behavior is due to the way the transistor is designed and is an important characteristic for many electronic applications.

 

Features :

• High Collector-Base Breakdown Voltage : BVCBO = 1500V

• High Switching Speed : tF(typ.) =0.1µs

• For Color Monitor

J6810 datasheet fairchild

Absolute maximum ratings ( Ta=25°C )

1. Collector to Base Voltage: Vcbo = 1500 V

2. Collector to Emitter Voltage: Vceo = 750 V

3. Emitter to Base Voltage: Vebo = 6 V

4. Collector Current: Ic = 10 A

5. Collector Dissipation: Pc = 60 W

6. Junction Temperature: Tj = 150°C

7. Storage Temperature: Tsg = -55 ~ +150°C

Application:

1. High Voltage Color Display Horizontal Deflection Output

Other data sheets are available within the file: FJAF6810

J6810 PDF Datasheet

YD7377 PDF Datasheet – 2 x 30W, Power Amplifier

Posted on by pinout

This post explains for the radio amplifier. A Class AB car radio amplifier is a type of audio amplifier circuit commonly used in car audio systems to amplify the low-level audio signals from sources like radios, CD players, or smartphones before driving the speakers in the vehicle. The term “Class AB” refers to the amplifier’s operating class, which is a classification of amplifier design based on the conduction angle of its output transistors.

The Part Number is YD7377.

The function of this semiconductor is 2 x 30W, Power Amplifier

The package is SIP 15 Pin Type

Manufacturer: ETC, ST

Preview images:

YD7377 pdf amplifier

Description

The YD7377 is a new technology class AB car radio amplifier able to work either in DUAL
BRIDGE or QUAD SINGLE ENDED configuration. The exclusive fully complementary structure of the output stage and the internally fixed gain guarantees the highest possible power performances with extremely reduced component count. The on-board clip detector simplifies gain compression operation. The fault diagnostics makes it possible to detect mistakes during car radio set assembly and wiring in the car.

Features

  • Class AB car radio power amplifier
  • Dual Bridge and Quad Single-Ended operating configurations
  • Fully complementary output stage
  • Internally fixed 26dB BTL gain
  • No bootstrap capacitors required
  • No Boucherot cells required
  • Minimum external component count
  • CMOS-compatible standby function
  • No audible pop during standby operation
  • Integrated clipping detection
  • Output-to-ground short detection
  • Output-to-supply short detection
  • Soft short detection during turn-on
  • Thermal shutdown proximity detection
  • Soft thermal limiting
  • Load dump voltage surge protection
  • Protection for highly inductive loads
  • Protection against accidental open ground conditions
  • Reverse battery protection

Pinout

YD7377 pinout datasheet
1. Class AB Operation: Class AB amplifiers are known for combining the features of both Class A and Class B amplifiers. They operate in a mode where one set of transistors (the “push” transistors) conducts for part of the input signal cycle, while another set (the “pull” transistors) conducts for the opposite part. This allows for better efficiency and reduced distortion compared to pure Class A or Class B amplifiers.

Working Principle

  • The YD7377 uses a class AB output architecture to amplify audio signals for automotive speaker loads
  • The fully complementary output stage provides high output capability while reducing the need for external support components
  • Dual Bridge operation drives speaker loads differentially to achieve higher output power from the available automotive supply voltage
  • Quad Single-Ended operation allows multiple channels to be configured for conventional single-ended speaker drive
  • The internally fixed 26dB BTL gain simplifies system design by eliminating the need for an external gain-setting network
  • The CMOS-compatible standby input allows the amplifier to be placed in a low-power state under system control
  • The integrated clip detector can provide an indication for gain compression or audio signal management
  • Fault diagnostic circuitry monitors abnormal output and thermal conditions to assist with system protection and assembly testing

Easy Single Ended to Bridge Transition:

The change from single ended to bridge configurations is made simply by means of a short circuit across the inputs, that is no need of further external components.

Other data sheets are available within the file: YD7377V, YD7377H

YD7377 PDF Datasheet