Pinout

86T02GH PDF Datasheet – 25V, MOSFET – AP86T02GH

Posted on by pinout

This post explains for the semiconductor AP86T02GH.

The Part Number is 86T02GH.

The function of this semiconductor is 25V, 75A, N-Channel Power MOSFET.

The package is TO-252, TO-251 Type

Manufacturer: Advanced Power Electronics

Preview images :

1 page
86T02GH pdf pinout

Description

The 86T02GH is N-Channel MOSFET. 

The TO-252 package is widely preferred for commercial-industrial surface mount applications and suited for low voltage applications such as DC/DC converters. The through-hole version (AP86T02GJ) is available for low-profile applications.

Features

1. Simple Drive Requirement

2. Low On-resistance

3. Fast Switching Characteristic

 

2 page
86T02GH datasheet

Absolute Maximum Ratings (Ta = 25°C)

1. Drain to source voltage: VDSS = 25 V

2. Gate to source voltage: VGSS = ± 20 V

3. Drain current: ID = 75 A

4. Total Power Dissipation: Pd = 75 W

5. Channel temperature: Tch = 150 °C

6. Storage temperature: Tstg = -55 to +150 °C

86T02GH PDF Datasheet

7493 PDF Datasheet – Decade and Binary Counter

Posted on by pinout

This post explains for the TTL DM7493.

The Part Number is 7493.

The function of this semiconductor is Decade and Binary Counter.

Manufacturer: National Semiconductor, Fairchild Semiconductor

Preview images :

1 page
DM7493 pdf pinout

Description

The 7493 is Decade and Binary Counter.

Each of these monolithic counters contains four masterslave flip-flops and additional gating to provide a divide-bytwo counter and a three-stage binary counter for which the count cycle length is divide-by-five for the 90A and divideby-eight for the 93A.

All of these counters have a gated zero reset and the 90A also has gated set-to-nine inputs for use in BCD nine’s complement applications.

To use their maximum count length (decade or four-bit binary) the B input is connected to the QA output The input count pulses are applied to input A and the outputs are as described in the appropriate truth table A symmetrical divide-by-ten count can be obtained from the 90A counters by connecting the QD output to the A input and applying the input count to the B input which gives a divide-by-ten square wave at output QA.

Features

1. Typical power dissipation 45 mW

2. Count frequency 42 MHz

2 page
DM7493 datasheet

7493 PDF Datasheet

Related articles across the web