Part Number: CSNL281-007
Function: Current Sensor : Closed Loop : CSN
Manufacturer: Honeywell International
Image:
Description
This is Current Sensor.
The CSN Series of closed loop current sensors are based on the principles of the Magnetoresistive or Hall effects, and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly controlled at zero. The amount of current required to balance zero flux is the measure of the primary current flowing through the conductor, multiplied by the ratio of the primary to secondary windings. This closed loop current is the output from the device and presents an image of the primary current reduced by the number of secondary turns at any time. This current can be expressed as a voltage by passing it through a resistor.
Features
1. Measures ac, dc and impulse currents
2. Competitive cost/performance ratio
3. Rapid response
4. High overload capability
5. High level of electrical isolation between primary and secondary circuits
6. Industrial operating temperature range
7. Small size and weight
Typical Applications:
1. Variable speed drives
2. Overcurrent protection
3. Ground fault detectors
4. Current feedback control systems
Other data sheets are available within the file: CSNL281007
CSNL281-007 Datasheet PDF Download
