DAC5652A Datasheet – 10-bit, High-speed DAC ( PDF )

Part Number: DAC5652A


Package: 48-Pin Thin-Quad Flat Pack (TQFP) Type

Manufacturer: Texas Instruments


DAC5652A datasheet



The DAC5652 is a monolithic, dual-channel, 10-bit, high-speed DAC with on-chip voltage reference.Operating with update rates of up to 275 MSPS, the DAC5652A offers exceptional dynamic performance, tight gain, and offset matching characteristics that make it suitable in either I/Q baseband or direct IF communication applications.
Each DAC has a high-impedance, differential-current output, suitable for single-ended or differential analog output configurations. External resistors allow scaling of the full-scale output current for each DAC separately or together, typically between 2 mA and 20 mA. An accurate on-chip voltage reference is temperature-compensated and delivers a stable 1.2-V reference voltage. Optionally, an external reference may be used.

The DAC5652A has two, 10-bit, parallel input ports with separate clocks and data latches. For flexibility, the IC also supports multiplexed data for each DAC on one port when operating in the interleaved mode. The device has been specifically designed for a differential transformer-coupled output with a 50-Ω doubly terminated load. For a 20-mA full-scale output current, both a 4:1 impedance ratio (resulting in an output power of 4 dBm) and 1:1 impedance ratio transformer (–2 dBm output power) are supported.

The DAC5652A is available in a 48-pin TQFP package. Pin compatibility between family members provides 10-bit (DAC5652A), 12-bit (DAC5662), and 14-bit (DAC5672) resolution. Furthermore, the DAC5652A is pin compatible to the DAC2900 and AD9763 dual DACs. The device is characterized for operation over the industrial temperature range of –40°C to 85°C.


• 10-Bit Dual Transmit Digital-to-Analog Converter (DAC)
• 275 MSPS Update Rate
• Single Supply: 3.0 V to 3.6 V
• High Spurious-Free Dynamic Range (SFDR) : 80 dBc at 5 MHz
• High Third-Order Two-Tone Intermodulation (IMD3) : 78 dBc at 15.1 MHz and 16.1 MHz
• Independent or Single Resistor Gain Control
• Dual or Interleaved Data
• On-Chip 1.2-V Reference
• Low Power : 290 mW
• Power-Down Mode : 9 mW

Other data sheets are available within the file: DAC5652AIPFB, DAC5652AIPFBR


DAC5652A Datasheet PDF Download

DAC5652A pdf