LMP92066 Datasheet – Dual, Temperature Controlled DAC

Part Number: LMP92066

Function: Dual Temperature-Controlled DAC

Package: HTSSOP 16 Pin Type

Manufacturer: Texas Instruments


LMP92066 datasheet



The LMP92066 is a highly integrated temperature-controlled dual DAC. Both DACs can be programmed by two independent, user-defined, temperature-to-voltage transfer functions stored in the internal EEPROM, allowing any temperature effects to be corrected without additional external circuitry. Once powered up, the device operates autonomously, without intervention from the system controller, to provide a complete solution for setting and
compensating bias voltages and currents in control applications.

The device has two analog outputs that support two output ranges: zero to plus five volts and zero to minus five volts. Each output can be switched to the load individually through the use of the dedicated control terminal. The output switching is designed for rapid response, making the device suitable for the RF Power Amplifier biasing applications.

The EEPROM is verified for 100 write operations, enabling repeated field updates. The EEPROM programming is completed upon the user-issued I2C command.

The IC’s digital ports interface to a variety of system controllers, as the dedicated VIO terminal sets the digital I/O levels. The device is available in the thermally enhanced PowerPAD™ package, enabling precise PCB temperature measurement.


1. Two Independent Transfer Functions Stored in EEPROM

2. Dual-Analog Output

(1) Two 12-Bit
(2) Output Range 0 V to 5 V or 0 V to –5 V
(3) High-Capacitive Load Tolerant, up to 10 µF
(4) Post-Calibration Accuracy ±2.4 mV (typical)

3. Output On/Off Control Switching Time 50 ns (typical)


LMP92066 Datasheet PDF Download

LMP92066 pdf

Other data sheets are available within the file: LMP92066PWP