PIC16F628A Datasheet – 8-bit PIC Microcontroller – Microchip

Part Number: PIC16F628A, PIC16F628A-I/P

Function: FLASH-Based 8-Bit CMOS Microcontroller

Package: PDIP, SOIC, SSOP, 28-Pin QFN Type

Manufacturer: Microchip Technology

Image

pic16f628a-microcontroller

 

Description

The PIC16F627A / PIC16F628A / PIC16F648A are 18-Pin FLASHbased members of the versatile PIC16CXX family of low cost, high performance, CMOS, fully-static, 8-bit microcontrollers.

All PICmicro microcontrollers employ an advanced RISC architecture. The PIC16F627A / PIC16F628A / PIC16F648A have enhanced core features, eight-level deep stack, and multiple internal and external interrupt sources. The separate instruction and data buses of the Harvard architecture allow a 14-bit wide instruction word with the separate 8-bit wide data. The two-stage instruction pipeline allows all instructions to execute in a singlecycle, except for program branches (which require two cycles). A total of 35 instructions (reduced instruction set) are available, complemented by a large register set.

 

Pinout

pic16f628a-datasheet-pinout

 

Features

1. High Performance RISC CPU:
(1) Operating speeds from DC – 20 MHz
(2) Interrupt capability
(3) 8-level deep hardware stack
(4) Direct, Indirect and Relative Addressing modes
(5) 35 single word instructions – All instructions single cycle except branches

2. Special Microcontroller

Features

(1) Internal and external oscillator options
–  Precision Internal 4 MHz oscillator factory calibrated to ±1%
– Low Power Internal 37 kHz oscillator
– External Oscillator support for crystals and resonators.
(2) Power saving SLEEP mode
(3) Programmable weak pull-ups on PORTB
(4) Multiplexed Master Clear/Input-pin
(5) Watchdog Timer with independent oscillator for reliable operation
(6) Low voltage programming

 

PIC16F628A Datasheet


 

Related articles across the web

PCF8574 Datasheet – Remote 8-bit I/O expander – Philips

Part Number: PCF8574

Function : Remote 8-bit I/O expander for I2C-bus

Package: DIP, SOP 16 Pin, SSOP 20 Pin Type

Manufacturer: Philips Semiconductors

Image

pcf8574-remote-expander
Description

The PCF8574 is a silicon CMOS circuit. It provides general purpose remote I/O expansion for most microcontroller families via the two-line bidirectional bus (I2C). The device consists of an 8-bit quasi-bidirectional port and an I2C-bus interface. The PCF8574 has a low current consumption and includes latched outputs with high current drive capability for directly driving LEDs. It also possesses an interrupt line (INT) which can be connected to the interrupt logic of the microcontroller. By sending an interrupt signal on this line, the remote I/O can inform the microcontroller if there is incoming data on its ports without having to communicate via the I2C-bus. This means that the PCF8574 can remain a simple slave device.

Pinout
pcf8574-datasheet-pinout

 

Features

1. Operating supply voltage 2.5 to 6 V
2. Low standby current consumption of 10 mA maximum
3. I2C to parallel port expander
4. Open-drain interrupt output
5. 8-bit remote I/O port for the I2C-bus
7. Compatible with most microcontrollers
8. Latched outputs with high current drive capability for directly driving LEDs
9. Address by 3 hardware address pins for use of up to 8 devices (up to 16 with PCF8574A)

 

PCF8574 Datasheet

PCF8574 pdf


 

Related articles across the web