HX711 Datasheet PDF – 24-Bit ADC Converter – AVIA

This is one of the ADC Converter types.

Part Number: HX711

Function: 24-Bit Analog-to-Digital Converter (ADC) for Weigh Scales

Package: SOP-16 Type

Manufacturer: AVIA SEMICONDUCTOR ( aviaic.com )

Image

HX711 image

Description

Based on Avia Semiconductor’s patented technology, HX711 is a precision 24-bit analog to-digital converter (ADC) designed for weigh scales and industrial control applications to interface directly with a bridge sensor. The input multiplexer selects either Channel A or B differential input to the low-noise programmable gain amplifier (PGA). Channel A can be programmed with a gain of 128 or 64, corresponding to a full-scale differential input voltage of ±20mV or ±40mV respectively, when a 5V supply is connected to AVDD analog power supply pin. Channel B has a fixed gain of 32. On chip power supply regulator eliminates the need for an external supply regulator to provide analog power for the ADC and the sensor. Clock input is flexible. It can be from an external clock source, a crystal, or the on-chip oscillator that does not require any external component. On-chip power on-reset circuitry simplifies digital interface initialization.

HX711 Pinout

HX711 datasheet pinout

Pin # Name Function Description

1 VSUP Power Regulator supply: 2.7 ~ 5.5V

2 BASE Analog Output Regulator control output(NC when not used)

3 AVDD Power Analog supply: 2.6 ~ 5.5V

4 VFB Analog Input Regulator control input(connect to AGND when not used)

5 AGND Ground Analog Ground

6 VBG Analog Output Reference bypass output

7 INA- Analog Input Channel A negative input

8 INA+ Analog Input Channel A positive input

9 INB- Analog Input Channel B negative input

10 INB+ Analog Input Channel B positive input

11 PD_SCK Digital Input Power down control (high active) and serial clock input

12 DOUT Digital Output Serial data output

13 XO Digital I/O Crystal I/O (NC when not used)

14 XI Digital Input Crystal I/O or external clock input, 0: use on-chip oscillator

15 RATE Digital Input Output data rate control, 0: 10Hz; 1: 80Hz

16 DVDD Power Digital supply: 2.6 ~ 5.5V

 

HX711 Features

1. Two selectable differential input channels

2. On-chip active low noise PGA with selectable gain of 32, 64 and 128

3. On-chip power supply regulator for load-cell and ADC analog power supply

4. On-chip oscillator requiring no external component with optional external crystal

5. On-chip power-on-reset

6. Simple digital control and serial interface

 

Applications

1. Weigh Scales

2. Industrial Process Control

HX711 Datasheet


 

Posts related to ‘ ADC ‘

Part number Description
RDA5807FP Broadcast FM Stereo Radio Tuner – RDA
AD7441 1 MSPS, 10-Bit ADC ( Converter )
SH79F0819 8051 Microcontroller with 10bit ADC
AD7277BRMZ 3 MSPS, 10-Bit ADC ( PDF )
AD7660 16-Bit, 100 kSPS, CMOS ADC
BCM5789 10/100/1000Base-T Controller – Broadcom
AD7683 16-Bit, 100 kSPS, PulSAR ADC
AD7608 8-Ch DAS, 18-Bit, Simultaneous Sampling ADC
AD7684 16-Bit, 100 kSPS, Differential ADC
BCM4335 Chip for 5G WiFi 802.11ac – Broadcom

 

Related articles across the web

TD1410 PDF Datasheet – PWM Buck DC/DC Converter

A PWM (Pulse Width Modulation) Buck DC/DC Converter is an electronic circuit or device used to regulate and control the output voltage of a power supply by adjusting the duty cycle of a high-frequency switching signal. This type of converter is also known as a step-down voltage regulator because it takes a higher input voltage and converts it into a lower, stable output voltage.

Part Number: TD1410

Function: 2A, 380KHZ, 20V, PWM Buck DC/DC Converter

Package: SOP 8 Pin Type

Manufacturer: Techcode

Images:TD1410 pdf converter

Description

The TD1410 is a 380 KHz fixed frequency monolithic step down switch mode regulator with a built in internal Power MOSFET. It achieves 2A continuous output current over a wide input supply range with excellent load and line regulation.

The device includes a voltage reference, oscillation circuit, error amplifier, internal PMOS and etc.
The PWM control circuit is able to adjust the duty ratio linearly from 0 to 100%. An enable function, an over current protection function and a short circuit protection function are built inside. An internal compensation block is built in to minimize external component count.

Features

1. 2A Constant Output Current

2. 140mΩ RDSON Internal Power PMOSFET Switch

3. Up to 95% Efficiency

4. Fixed 380KHz Frequency

5. Wide 3.6V to 20V Input Voltage Range

6. Output Adjustable from 1.222V to 18V

7. Built in Frequency Compensation

Pinouts

TD1410 pinout datasheet

Applications:

1. Portable DVD

2. LCD Monitor / TV

3. Battery Charger

4. ADSL Modem

5. Telecom / Networking Equipment

TD1410 PDF Datasheet