Part Number: UF1600FCT thru UF1608FCT

Function: 50V, 16A, ULTRAFST SWITCHING RECTIFIER

Package: ITO-220AB molded plastic type

Manufacturer: Pan Jit International

Images:

Description

UF1600FCT is 50V, 16A, ISOLATION ULTRAFST SWITCHING RECTIFIER. An “ultrafast switching rectifier” refers to a type of diode rectifier designed for extremely fast switching speeds. Rectifiers are electronic devices used to convert alternating current (AC) into direct current (DC) by allowing current to flow in only one direction. Ultrafast switching rectifiers are optimized for applications where rapid switching of AC signals or high-frequency AC waveforms is necessary.

Features

• Plastic package has Underwriters Laboratory Flammability Classification 94V-O

• Flame Retardant Epoxy Molding Compound.

• Exceeds environmental standards of MIL-S-19500/228. • Low power loss,high efficiency.

• Low forward voltage, high current capability. • High surge capacity.

• Ultra fast recovery times, high voltage. .

Ultrafast switching rectifiers are commonly employed in various power electronic applications, including voltage rectification, voltage clamping, freewheeling diodes in switching power supplies, and high-frequency rectification in RF communication equipment. They are designed to handle the challenges posed by high-frequency and fast-switching circuits, providing efficient and accurate rectification of AC signals.

UF1600FCT PDF Datasheet

The Part Number is 1N4148, IN4148.

The function of this diode is Small Signal Fast Switching Diode.

Package: DO-25 ( DO-204AH )

Manufacturer: Vishay Telefunken

Description

1N4148 Diode is 100V, 300mA, Rectifier. A switching diode, also known as a fast diode or a high-speed diode, is a type of diode designed specifically for high-speed switching applications. These diodes are characterized by their ability to transition quickly between their conducting (forward-biased) and non-conducting (reverse-biased) states, making them suitable for use in electronic circuits where fast switching times are crucial.

1. Voltage Rating (100V): This indicates the maximum reverse voltage that the diode can handle without breaking down or experiencing a reverse breakdown voltage. In other words, the diode can be reverse-biased up to 100 volts before it may start conducting in the reverse direction due to a breakdown.

2. Current Rating (300mA): This represents the maximum forward current that the diode can handle without becoming damaged. In this case, the diode is rated for a continuous forward current of 300 milliamperes (mA).

3. Switching Diode: The term “switching diode” suggests that this diode is designed for high-speed switching applications. Switching diodes are typically characterized by fast recovery times, low capacitance, and low forward voltage drop.

They are commonly used in applications where rapid on/off switching is required, such as in rectifiers, signal clippers, and voltage clamps.

Specification

1. Case : DO-35 (DO-204AH)

2. Weigh t: approx. 105 mg

3. Cathode band color : black

Features

1. Silicon epitaxial planar diode

2. Electrically equivalent diodes : 1N4148 – 1N914

3.  Material categorization :

Applications

1. Extreme fast switches

 

Absolute maximum ratings ( Ta=25°C )

1. Repetitive peak reverse voltage : VRRM = 100 V

2. Reverse voltage : VR = 75 V

3. Peak forward surge current (tp = 1 μs) : IFSM = 2 A

4. Repetitive peak forward current : IFRM = 500 mA

5. Forward continuous current : IF = 300 mA

6. Average forward current (VR = 0) : IF(AV) = 150 mA

7. Power dissipation :

( l = 4 mm, TL = 45 °C) Ptot = 440 mW
( l = 4 mm, TL ≤ 25 °C) Ptot = 500 mW

1N4148 PDF Diode

External link : 1N4148 Datasheet search site

---