Diode

SL03 Datasheet – 3.3V, 300 Watt, TVS, Diode, Rectifier – MCC

Posted on by pinout

Part Number: SL03

Function: 3.3V, Transient Voltage Suppressor 300 Watt Diode

Package: SOT-23 Type

Manufacturer: Micro Commercial Components

Pinouts:

SL03 datasheet

Description

This product provides unidirectional protection for 1 line by connecting the input/output line to pin 1, pin 2 to common or ground and pin 3 (is not connected). The SL03 thru SL24 product provides board level protection from static electricity and other induced-voltage surges that can damage sensitive circuitry. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays protect 3.0/3.3 Volt components such as DRAM’s, SRAM’s, COMS, HCOMS, HSIC, and low volt. interfaces up to 24 volts. Because of the physical size, weight and protection capabilities, this product is ideal for use in but not limited to miniaturized electronic equipment such as hand held instruments, computers, computer peripherals and cell phones.

Features

1. SOT-23 Package For surface mount application
2. Protects 3.0/3.3 up through 24V Components
3. Protects 1 Unidirectional line
4. Provides electrically isolated protection
5. Tape & Reel EIA Standard 481
6. Epoxy meets UL 94 V-0 flammability rating

Mechanical Data

1. Molded : SOT-23 Surface Mount
2. Body marked with device number
3. Mounting Position : Any
4. Weight : 0.0077 grams (approx.)

Other data sheets are available within the file: SL05, SL12, SL15, SL24

SL03 Datasheet PDF

SL03 pdf

1N4947 Datasheet PDF – 800V, 1A, Rectifier – Microsemi

Posted on by pinout

Part Number: 1N4947

Function: Glass Passivated Fast Recovery Rectifier

Package: DO-41 Type

Manufacturer: Microsemi Corporation

Pinouts:

1N4947 datasheet PDF

Description

Maximum recurrent peak reverse voltage 800 V. Maximum average forward rectified current 1.0 A.

This “fast recovery” rectifier diode series is military qualified to MIL-PRF-19500/359 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 1.0 Amp rated rectifiers for working peak reverse voltages from 200 to 1000 volts are hermetically sealed with voidless-glass construction using an internal “Category I” metallurgical bond.

These devices are similar in ratings to the 1N5615 thru 1N5623 series where surface mount MELF package configurations are also available by adding a “US” suffix (see separate data sheet for 1N5615US thru 1N5623US). Microsemi also offers numerous other rectifier products to meet higher and lower current ratings with various recovery time speed requirements including fast and ultrafast device types in both through-hole and surface mount packages.

Other data sheets are available within the file: 1N4936, 1N4946, 1N4947, 1N5621, 1N5619

1N4947 Datasheet PDF Download

1N4947 pdf