Driver

74HCT365D Datasheet PDF – Hex Buffer / Line driver

Posted on by pinout

Part Number: 74HCT365D

Function: Hex Buffer / Line Driver; 3-state

Package: DIP, SOP 16 Pin Type

Manufacturer: Philips Electronics ( https://www.nxp.com/ )

Pinouts:

74HCT365D datasheet

 

Description

The 74HC365, 74HCT365D is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (OEn). A HIGH on OEncauses the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

 

Features

1. Non-inverting outputs

2. Output capability : bus driver

3. ICC category : MSI

 

Other data sheets are available within the file:

74HC365, 74HC365DB, 74HC365N, 74HC365NB

 

74HCT365D Datasheet PDF Download


74HCT365D pdf

Related articles across the web

DRV8301 Datasheet PDF – Gate Driver IC

Posted on by pinout

Part Number: DRV8301

Function: Automotive 3-Phase BLDC Pre-Driver / Dual Current Sense Amps and Buck Converter

Package: HTSSOP (56) Type

Manufacturer: Texas Instruments

Pinouts:

DRV8301 datasheet

 

Description

The DRV8301 is an automotive gate driver IC for three phase motor drive applications. It provides three half bridge drivers, each capable of driving two N-type MOSFETs, one for the high-side and one for the low side. It supports up to 2.3A sink and 1.7A source peak current capability and only needs a single power supply with a wide range from 6V to 60V. The DRV8301-Q1 uses bootstrap gate drivers with trickle charge circuitry to support 100% duty cycle. The gate driver uses automatic hand shaking when high side FET or low side FET is switching to prevent current shoot through. Vds of FETs is sensed to protect external power stage during overcurrent conditions.

The DRV8301Q1 includes two current shunt amplifiers for accurate current measurement. The current amplifiers support bi-directional current sensing and provide an adjustable output offset of up to 3V.

Features

1. Slew Rate Control for EMI Reduction

2. Bootstrap Gate Driver With 100% Duty Cycle Support

3. 6- or 3-PWM Input Modes

4. Dual Integrated Current Shunt Amplifiers With Adjustable Gain and Offset

5. Integrated 1.5-A Buck Converter

Other data sheets are available within the file: DRV8301Q1

 

DRV8301 Datasheet PDF Download


DRV8301 pdf