PSD834F2V Datasheet PDF – Flash PSD for 8-bit MCU – ST

Part Number: PSD834F2V

Function: Flash PSD, 3.3V Supply, for 8-bit MCU SRAM

Package: PQFP, PLCC 52 Pin

Manufacturer: STMicroelectronics

Pinouts:

PSD834F2V datasheet

 

Description

The PSD family of memory systems for microcontrollers (MCUs) brings In-System-Programmability (ISP) to Flash memory and programmable logic. The result is a simple and flexible solution for embedded designs. PSD devices combine many of the peripheral functions found in MCU based applications. The CPLD in the PSD devices features an optimized macrocell logic architecture. The PSD mac rocell was created to address the unique requirements of embedded system designs. It allows direct connection between the system address/data bus, and the internal PSD registers, to simplify communication between the MCU and other supporting devices.

Features

1. Flash In-System Programmable (ISP) Peripheral for 8-bit MCUs
2. 3.3 V±10% Single Supply Voltage
3. 2 Mbit of Primary Flash Memory (8 uniform sectors, 32K x 8)
4. 256 Kbit Secondary Flash Memory (4 uniform sectors)
5. 64 Kbit of battery-backed SRAM
6. Over 3,000 Gates of PLD: DPLD and CPLD
7. 27 Reconfigurable I/O ports
8. Enhanced JTAG Serial Port
9. Programmable power management
10. High Endurance:
(1) 100,000 Erase/Write Cycles of Flash Memory
(2)  1,000 Erase/Write Cycles of PLD

Other data sheets are available within the file: PSD834F2-10J, PSD834F2-10JI, PSD834F2-10JIT, PSD834F2-10JT, PSD834F2-10M

PSD834F2V Datasheet PDF Download


PSD834F2V pdf

AM29LV001B Datasheet PDF – 1 Megabit Flash Memory – AMD

Part Number: AM29LV001B

Function: 1 Megabit (128 K x 8-Bit),  Flash Memory

Package: TSOP, PLCC 32 Pin Type

Manufacturer: Advanced Micro Devices

Pinouts:

AM29LV001B datasheet

 

Description

The Am29LV001B is a 1 Mbit, 3.0 Volt-only Flash memory device organized as 131,072 bytes. The Am29LV001B has a boot sector architecture. The device is offered in 32-pin PLCC and 32-pin TSOP packages. The byte-wide (x8) data appears on DQ7–DQ0. All read, erase, and program operations are accomplished using only a single power supply. The device can also be programmed in standard EPROM programmers.

Features

1. Single power supply operation
(1) Full voltage range: 2.7 to 3.6 volt read and write operations for battery-powered applications
(2) Regulated voltage range: 3.0 to 3.6 volt read and write operations and for compatibility with high performance 3.3 volt microprocessors

2. Manufactured on 0.35 μm process technology
3. High performance
(1) Full voltage range: access times as fast as 55 ns
(2) Regulated voltage range: access times as fast as 45 ns

4. Ultra low power consumption (typical values at 5 MHz)
(1) 200 nA Automatic Sleep mode current
(2) 200 nA standby mode current
(3) 7 mA read current
(4) 15 mA program/erase current

Other data sheets are available within the file:

AM29LV001BB-45RECB, AM29LV001BB-45REE, AM29LV001BB-45REEB, AM29LV001BB-45REI

AM29LV001B Datasheet PDF Download


AM29LV001B pdf