OP Amp

MC33304DR2 Datasheet – Rail-to-Rail, Operational Amplifier

Posted on by pinout

Part Number: MC33304DR2

Function: Low Voltage Rail-to-Rail, Sleepmode Operational Amplifier

Package: SO-14 Pin Type

Manufacturer: ON Semiconductor

Pinouts:

MC33304DR2 datasheet

 

Description

The MC33304 is a monolithic bipolar operational amplifier. This low voltage rail–to–rail amplifier has both a rail–to–rail input and output stage, with high output current capability. This amplifier also employs Sleep–Mode technology. In sleepmode, the micropower amplifier is active and waiting for an input signal. When a signal is applied, causing the amplifier to source or sink ≥200 µA (typically) to the load, it will automatically switch to the awakemode (supplying up to 70 mA to the load). When the output current drops below 90 µA, the amplifier automatically returns to the sleepmode.

Ordering Information

components

Features

1. Ideal for Battery Applications
2. Full Output Signal (No Distortion) for Battery Applications Down to ±0.9 VDC.
3. Single Supply Operation (+1.8 to +12 V)
4. Rail–To–Rail Performance on Both the Input and Output
5. Output Voltages Swings Typically within 100 mV of Both Rails (RL = 1.0 mW)
6. Independent Sleepmode Function for Each Amplifier
7. No Phase Reversal on the Output for Overdriven Input Signals
8. High Output Current (70 mA typically)
9. 600 W Drive Capability
10.Standard Pinouts; No Additional Pins or Components Required

Other data sheets are available within the file: MC33304D, MC33304, MC33304P

MC33304DR2 Datasheet PDF Download


MC33304DR2 pdf

NE5534AP Datasheet – Low-Noise Operational Amplifiers – TI

Posted on by pinout

Part Number: NE5534AP

Function: NE5534x, SA5534x Low-Noise Operational Amplifiers

Manufacturer: Texas Instruments

Image:

NE5534AP image

Pinouts:

NE5534AP datasheet

 

Description

The NE5534, NE5534A, SA5534, and SA5534A devices are high-performance operational amplifiers combining excellent dc and ac characteristics. Some of the features include very low noise, high output-drive capability, high unity-gain and maximum-output swing bandwidths, low distortion, and high slew rate.

These operational amplifiers are compensated internally for a gain equal to or greater than three. Optimization of the frequency response for various applications can be obtained by use of an external compensation capacitor between COMP and COMP/BAL.

Schematic
NE5534AP Schematic
Features

1. Equivalent Input Noise Voltage 3.5 nV/√Hz Typ
2. Unity-Gain Bandwidth 10 MHz Typ
3. Common-Mode Rejection Ratio 100 dB Typ
4. High DC Voltage Gain 100 V/mV Typ
5. Peak-to-Peak Output Voltage Swing 32 V Typ With V CC ± = ± 18 V and R L = 600 Ω
6. High Slew Rate 13 V/μs Typ

NE5534AP Block Diagram

Official Homepage: https://www.ti.com/product/NE5534A

NE5534AP Datasheet PDF Download

NE5534 pdf

Other data sheets are available within the file: 5534A, SA5534A, NE5534, SA5534AP