relay

SLA-24VDC-S-L-C Datasheet – DC 24V, Relay – Songle

Posted on by pinout

This post explains for the relay.

The Part Number is SLA-24VDC-S-L-C.

The function of this semiconductor is DC 24V, Relay.

Manufacturer: Songle

Preview images :SLA-24VDC-S-L-C pinout datasheet

Description

This is SONGLE RELAY. A relay allows a low-power electrical signal, such as from a microcontroller or sensor, to control a much larger current or voltage, such as required to drive a motor or light bulb. This allows a small electronic device to control a much larger one, or to isolate the low-power circuit from the high-power one. Relays are used in a wide range of applications, including automotive systems, HVAC systems, and computer power supplies.

1. MAIN Features

(1) Up to 30A switching in SPST and 20A switching in spot arrangements.

(2) Available as an open-frame relay, with a snap-on dust cover or with an immersion cleanable, plastic sealed case.

2. Applications

(3) Used for power switching, Electrical Heater, ventilator, Air conditioning, Refrigerating, Automobile and House-hold Appliance.

3. ORDERING INFORMATION SLA Model of relay SLA XX VDC Nominal coil voltage 05 06 09 12 18 24 48 110VDC S Structure S:Sealed type Coil L sensitivity C Contact form A:1 form A B:1 form B C:1 form C L:0.93W D:Special F:Flux free type 4. RATING 20A/28VDC 250VAC 30A/30VDC 250VAC CCC FILE NUMBER:CQC03001003728 UL/CUL FILE NUMBER: E179944 TUV FILE NUMBER: R50056114 30A/250VDC NO:20A/240VAC 28VDC NC:10A/240VAC 28VDC NO:30A/250VAC 30VDC NC:20A/250VAC 30VDC 5. DIMENSION(unit:mm) DRILLING(unit:mm) WIRING DIAGRAM 1 6. COIL DATA CHART (AT20 ö C) Coil Sensitivity SLA […]

SLA-24VDC-S-L-C pdf

SLA-24VDC-S-L-C Datasheet

SLA-12VDC-S-L-C PDF – 12V, Songle, Relay

Posted on by pinout

Part Number: SLA-12VDC-S-L-C

Function: 12V, 1 form C, Relay

Package: PCB Type

Manufacturer: Songle

Images:SLA-12VDC-S-L-C relay pinout

Description

A 12V, 1 form C relay, SLA-12VDC-S-L-C refers to a specific type of relay with a 12-volt operating voltage and 1 form C (also known as 1C or SPDT – Single Pole Double Throw) configuration.

Here’s what each part of the specification means:

(1) 12V: This indicates the operating voltage of the relay. In this case, the relay is designed to operate with a voltage of 12 volts DC (Direct Current). The relay coil is energized with this voltage to activate the switching action.

(2) 1 form C: The term “1 form C” refers to the contact configuration of the relay. It means that the relay has a single set of common (C) contacts and can switch between two separate positions. In the normal state, the common contact is connected to one of the other two contacts (usually referred to as normally open (NO) and normally closed (NC)). When the relay is energized, the common contact switches from one position to the other.

Relays are electromechanical devices that use an electromagnetic coil to control the switching of contacts. They are commonly used in various applications, such as control systems, automation, automotive electronics, and power distribution. The 1 form C configuration is particularly useful when you need a single relay to switch between two different circuits or states.

MAIN Features:

1. Up to 30A switching in SPST and 20A switching in spot arrangements.

2. Available as an open-frame .relay, with a snap-on dust cover or with an immersion cleanable, plastic sealed case.

Applications:

1. Used for power switching, Electrical Heater, ventilator, Air conditioning, Refrigerating, Automobile and House-hold Appliance.

ORDERING INFORMATION:

SLA Model of relay SLA XX VDC Nominal coil voltage 05 06 09 12 18 24 48 110VDC S Structure S:Sealed type Coil L sensitivity C Contact form A:1 form A B:1 form B C:1 form C L:0.93W D:Special F:Flux free type 4. RATING 20A/28VDC 250VAC 30A/30VDC 250VAC CCC FILE NUMBER:CQC03001003728 UL/CUL FILE NUMBER: E179944 TUV FILE NUMBER: R50056114  […]

 

SLA-12VDC-S-L-C pdf datasheet

Related Posts

SLA-12VDC-S-L-C PDF Datasheet