N74F776F Datasheet PDF – Pi-bus Transceiver

Part Number: N74F776F

Function: Pi-bus transceiver / Octal latched transceiver

Package: DIP, PLCC 28 Pin Type

Manufacturer: Philips Electronics ( https://www.nxp.com/ )

Pinouts:

N74F776F datasheet

 

Description

The 74F776, N74F776F is an octal bidirectional latched transceiver and is intended to provide the electrical interface to a high performance wired–OR bus. The B port inverting drivers are low–capacitance open collector with controlled ramp and are designed to sink 100mA from 2 volts. The B port inverting receivers have a 100 mV threshold region and a 4ns glitch filter.

The 74F776 A port has TTL 3–state drivers and TTL receivers with a latch function. A separate high–level control voltage input (VX) is provided to limit the A side output level to a given voltage level (such as 3.3V). For 5.0V systems, VXis simply tied to VCC.

Features

1. Octal latched transceiver

2. Drives heavily loaded backplanes with equivalent load impedances down to 10 ohms

3.  High drive (100mA) open collector drivers on B port

4. Reduced voltage swing (1 volt) produces less noise and reduces power consumption

5.  High speed operation enhances performance of backplane buses and facilitates incident wave switching

6. Compatible with Pi–bus and IEEE 896 Futurebus standards

7. Built–in precision band–gap reference provides accurate receiver thresholds and improved noise immunity

8. Controlled output ramp and multiple GND pins minimize ground bounce

 

N74F776F Datasheet PDF Download


N74F776F pdf

Other data sheets are available within the file: 74F776, I74F776A, I74F776N, N74F776A, N74F776

MAX490 Datasheet PDF – RS-485/RS-422 Transceiver – Maxim

Part Number: MAX490, MAX490ECPA

Function: Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceiver

Package: DIP 8 Pin

Manufacturer: Maxim

Image

MAX490 datasheet

Description

The MAX481, MAX483, MAX485, MAX487 – MAX490, and MAX1487 are low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.

Pinout
MAX490 pinout transceiver
Application:

1. Low-Power RS-485 Transceivers
2. Low-Power RS-422 Transceivers
3. Level Translators
4. Transceivers for EMI-Sensitive Applications
5. Industrial-Control Local Area Networks

 

MAX490 Datasheet


 

Other data sheets are available within the file: MAX490CPA, MAX490CSA, MAX490CUA

Related articles across the web