TPS75201QPWP Datasheet – Low-dropout Voltage Regulator

Part Number: TPS75201QPWP

Function: 2-A, Ultra-low-dropout Voltage Regulator

Package: HTSSOP 20 Pin Type

Manufacturer: Texas Instruments


TPS75201QPWP datasheet



The TPS752xxQ and TPS754xxQ devices are low-dropout regulators with integrated power-on reset and power-good (PG) functions respectively. These devices are capable of supplying 2 A of output current with a dropout of 210 mV (TPS75233Q, TPS75433Q). Quiescent current is 75 μA at full load and drops down to 1 μA when the device is disabled. These devices are designed to have fast transient response for larger load current changes. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 210 mV at an output current of 2 A for the TPS75x33Q) and is directly proportional to the output current. Additionally, because the PMOS pass
element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 75 μA over the full range of output current, 1 mA to 2 A). These two key specifications yield a significant improvement in operating life for battery-powered systems.


1. 2-A Low-Dropout Voltage Regulator
2. Available in 1.5 V, 1.8 V, 2.5 V, 3.3 V Fixed Output and Adjustable Versions
3. Open Drain Power-On Reset With 100ms Delay(TPS752xxQ)
4. Open Drain Power-Good (PG) Status Output(TPS754xxQ)
5. Dropout Voltage Typically 210 mV at 2 A(TPS75233Q)
6. Ultralow 75-μA Typical Quiescent Current
7. Fast Transient Response
8. 2% Tolerance Over Specified Conditions for Fixed-Output Versions
9. 20-Pin TSSOP PowerPAD™ (PWP) Package
10. Thermal Shutdown Protection


1. Telecom
2. Servers
3. DSP, FPGA Supplies

Other data sheets are available within the file:


TPS75201QPWP Datasheet PDF Download

TPS75201QPWP pdf