JRC4565 PDF Datasheet – Dual Noise Operational Amplifier

Part Number: JRC4565

Function: Dual Low Noise Operational Amplifier

Package: DIP 8, DMP 8, SOP 8, SSOP 8, SIP 8 Pin Type

Manufacturer: New Japan Radio

Images:JRC4565 pdf pinout

Description

A “Dual Noise Operational Amplifier” typically refers to an integrated circuit (IC) package that contains two individual operational amplifiers (op-amps) in a single IC package. These dual op-amp ICs are commonly used in various electronic circuits and provide two independent op-amp channels in a convenient package.

The JRC4565 is a high-gain, wide-bandwidth, dual low noise operational amplifier capable of driving 20V peak-to-peak into 400Ω loads. The NJM4565 is good characteristics compared to the NJM4560.

Features

1. Operating Voltage : ( ±4V~±18V )

2. Wide Gain Bandwidth Product : ( 4MHz typ. )

3. Slew Rate : ( 4V/μs typ. )

4. Package Outline : DIP8, DMP8, SSOP8, SIP8 SOP8

5. Bipolar Technology

JRC4565-datasheet.gif

Dual noise operational amplifiers find applications in various electronic circuits, including audio amplifiers, instrumentation amplifiers, filters, signal conditioning circuits, and more. The presence of two independent op-amp channels in a single IC package can save board space and simplify circuit design.

JRC4565 PDF Datasheet

29F32G08C PDF Datasheet – 32GB, NAND Flash Memory

Part Number: 29F32G08C

Function: 32GB, NAND Flash Memory

Package: TSSOP 48 Pin Type

Manufacturer: Micron

Images:29F32G08C pdf memory

Description

29F32G08C is 32GB, NAND Flash Memory.

Micron NAND Flash devices include an asynchronous data interface for high-performance I/O operations. These devices use a highly multiplexed 8-bit bus (DQx) to transfer commands,address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection (WP#) and monitor device status (R/B#).

This Micron NAND Flash device additionally includes a synchronous data interface for high-performance I/O operations. When the synchronous interface is active, WE# becomes CLK and RE# becomes W/R#. Data transfers include a bidirectional data strobe (DQS)

 

Features

• Open NAND Flash Interface (ONFI) 2.1-compliant1

• Multiple-level cell (MLC) technology

• Synchronous I/O performance

– Up to synchronous timing mode 4

– Clock rate: 12ns (DDR) – Read/write throughput per pin: 166 MT/s

• Asynchronous I/O performance

– Up to asynchronous timing mode 4

– tRC/tWC: 25ns (MIN)

• Array performance

– Read page: 50µs (MAX)

– Program page: 900µs (TYP)

– Erase block: 3ms (TYP)

• RESET (FFh) required as first command after poweron

• Operation status byte provides software method for detecting

– Operation completion

– Pass/fail condition

– Write-protect status

Pinouts:
29F32G08C pinout datasheet

NAND flash memory is a type of non-volatile storage technology that is widely used in electronic devices for data storage, such as smartphones, solid-state drives (SSDs), USB drives, memory cards, and more. It is a key component in modern digital devices due to its high storage capacity, fast read and write speeds, and durability.

29F32G08C PDF Datasheet