BLD123D PDF Datasheet – 400V, 1.75A, NPN Transistor

Part Number: BLD123D

Function: 400V, 1.75A, NPN Transistor

Package: TO-92 Type

Manufacturer: LZG

Images:BLD123D datasheet pinout

Description

BLD123D is 400V, 1.75A, Silicon NPN Transistor. 

 

Absolute maximum ratings ( Ta=25°C )

1. Collector to Base Voltage: Vcbo = 600 V

2. Collector to Emitter Voltage: Vceo = 400 V

3. Emitter to Base Voltage: Vebo = 9 V

4. Collector Current: Ic = 1.75 A

5. Collector Dissipation : Pc = 1 W

6. Junction Temperature: Tj = 150°C

7. Storage Temperature: Tsg = -55 ~ +150°C

BLD123D pdf transistor

Applications:

1. High frequency electronic lighting ballast applications

2. Converters, inverters, switching regulators, etc.

BLD123D PDF Datasheet

TEA2025B Audio Amplifer ( Pinout )

This is Audio Amplifier.

Part Number: TEA2025B

Function: Stereo Audio Amplifer

Package: PDIP 16 Pin type

Manufacturer: STMicroelectronics

Images:

TEA2025B amplifier datasheet

Description

The TEA2025B is specifically designed for low-power audio applications and is commonly used in portable devices, such as radios, boomboxes, and small speakers.

It’s important to note that the TEA2025B is a low-power audio amplifier, suitable for small-scale audio systems. It may not provide sufficient power for larger speaker systems or high-volume applications. However, it can be an ideal choice for low-power audio amplification needs in portable and battery-operated devices.

Features

1. DUAL OR BRIDGE CONNECTION MODES
2. FEW EXTERNAL COMPONENTS
3. SUPPLY VOLTAGE DOWN TO 3V
4. HIGH CHANNEL SEPARATION
5. VERY LOW SWITCH ON/OFF NOISE MAX GAIN OF 45dB WITH ADJUST EXTERNAL RESISTOR
6. SOFT CLIPPING

Specifications:

1. Low Voltage Operation: It operates on a low supply voltage, typically between 3V and 15V, making it suitable for battery-powered devices.

2. Dual-Channel Design: It provides two independent audio channels, allowing it to drive a pair of speakers or stereo headphone outputs.

3. Internal Gain Control: The IC incorporates an internal gain control circuit, allowing the user to adjust the amplification level as per their requirements.

4. Thermal and Overload Protection: The device includes built-in thermal and overload protection circuits to prevent damage to the IC and connected speakers in case of excessive heat or overload conditions.

5. Simple Application: It requires minimal external components and has a straightforward application circuit, making it easy to use in various audio applications.

Block Diagram and Pinouts

TEA2025B pinout blockdiagram

Input Capacitor:

Input capacitor is PNP type allowing source to be referenced to ground. In this way no input coupling capacitor is required. However, a series capacitor (0.22 uF)to the input side can be useful in case of  oise due to variable resistor contact.

Bootstrap:

The bootstrap connection allows to increase the output swing. The suggested value for the bootstrap capacitors (100uF) avoids a reduction of the output signal also at low frequenciesand low supply voltages.

TEA2025B Datasheet

Related articles across the web