FR3707Z Transistor – MOSFET, 30V, 56A ( IRFR3707Z )

Part Number: FR3707Z, IRFR3707Z

Function: 30V, 56A, HEXFET POWER MOSFET

Package: D-Pak, I-Pak Type

Manufacturer: International Rectifier

Images:FR3707Z pdf transistor

Description

This is 30V, 9.5nC, 56A, HEXFET Power MOSFET.

HEXFET Power MOSFET is a brand name for a MOSFET transistor manufactured by International Rectifier (now part of Infineon Technologies). It is characterized by fast switching and low gate drive current.

This MOSFET can be applied up to 30 V between drain and source.

The total gate charge (Q_g) is the amount of charge required to fully charge the gate of the MOSFET. This is an important parameter that determines the switching speed and the requirements of the gate driver. The lower the value, the faster the switching and the lower the driver power requirement.

Benefits:

1. Very Low RDS(on) at 4.5V VGS

2. Ultra-Low Gate Impedance

3. Fully Characterized Avalanche Voltage and Current

 

Absolute Maximum Ratings (Ta = 25°C)

1. Drain to source voltage: VDSS = 30 V

2. Gate to source voltage: VGSS = ± 20 V

3. Drain current: ID = 56 A

4. Drain Power Dissipation: Pd = 50 W

5. Channel temperature: Tch = 150 °C

6. Storage temperature: Tstg = -55 to +175 °C

 

Applications:

1. High Frequency Synchronous Buck Converters for Computer Processor Power

2. High Frequency Isolated DC-DC Converters with Synchronous Rectification for Telecom and Industrial Use

 

FR3707Z Datasheet

FP6861C PDF Datasheet – Power Distribution Switch

A power distribution switch is a device or component used in electrical systems to control the distribution of electrical power to various loads or devices. These switches are commonly found in industrial settings, buildings, data centers, and other applications where multiple electrical circuits need to be managed efficiently and safely.

Part Number: FP6861C

Function: Single-Channel Power Distribution Switch

Package: MSOP-8, SOP-8 and SOT-23-5 Type

Manufacturer: Fiti ( Fitipower Integrated Technology Inc )

Images:FP6861C pdf datasheet

Description

The FP6861C is a cost-effective, low voltage, single N-Channel MOSFET high-side power switch,
optimized for self-powered and bus-powered Universal Serial Bus (USB) applications.

The FP6861 is equipped with a charge pump circuitry to drive the internal MOSFET switch. The switch’s low RDS(ON) meets USB voltage drop requirement, and a flag output is available to indicate fault conditions to the local USB controller

Features

1. Compliant to USB Specifications

2. Built-In Low RDS(ON) N-Channel MOSFET

3. Output can be Forced Higher than Input (Off-State)

4. Wide Input Voltage Ranges: 2.7V to 5.5V

5. Open-Drain Fault Flag Output

6. Hot Plug-In Application (Soft-Start)

7. 2.2V Typical Under-Voltage Lockout (UVLO)

8. Current Limit Protection

9. Thermal Shutdown Protection

10. Reverse Current Flow Blocking (No Body Diode)

FP6861C pinout

Applications:

1. USB Bus/Self Powered Hub

2. USB Peripheral

3. ACPI Power Distribution

4. Notebook, Motherboard PC

5. Battery-Charger Circuit

FP6861C PDF Datasheet