GH-1C-12L PDF Datasheet – 12V, 0.36W, Relay – Golden

The Part Number is GH-1C-12L, GH1C12L.

This post explains for the relay.

The function of this semiconductor is 12V, Relay.

Package: DIP 5 Pin

Manufacturer: GH ( Golden Relays )

Preview images :

GH-1C-12L pdf

Description

The GH-1C-12L is 12V, 0.36W, Relay.

A relay is an electrically operated switch that opens or closes a circuit by activating an electromagnet to actuate the switch. It allows a low-power electrical signal, such as from a microcontroller or sensor, to control a much larger current or voltage, such as required to drive a motor or light bulb.

Features

1. Superminiature, High power.

2. Low coil power consumption.

3. PC board mounting.

4. Suitable for household appliance, automation system, electronic equipment, instrument and meter, communication facilities and remote control facilities.

 

Contact Data :

1. Contact Arrangement 1A, 1B, 1C

2. Contact Material Nil: Ag-CdO S: Ag-SnO2

3. Contact Rating (resistive) 5A, 6A, 10A, 12A,15A/125VAC,28VDC; 6A/277VAC; 5A,10A/250VAC

4. Max. Switching Power 336W 2500VA

5. Max. Switching Voltage 110VDC 380VAC Max. Switching Current:12A

6. Contact Resistance or Voltage drop 50mΩ Max. Item 3.12 of IEC255-7

7. Operation Electrical 105 Item 3.30 of IEC255-7

8. life Mechanical 107 Item 3.31 of IEC255-7

[…]
GH-1C-12L pinout datasheet

GH-1C-12L Datasheet PDF

EE25 PDF Datasheet – 8Pin, Transformer Spec

This post explains for the transformer.

The Part Number is EE25.

The function of this semiconductor is Single stage LED driver.

Manufacturer: FPE, ETC

Preview images :EE25 pdf datasheet

Description

EE25 is Transformer for Single stage LED driver.

A single-stage LED driver is a type of LED driver circuit that integrates both power factor correction (PFC) and LED driving functions into a single stage, as opposed to the traditional two-stage approach where PFC and LED driving are separate stages. In this context, a transformer is not typically used in a single-stage LED driver circuit.

The primary purpose of a transformer in a power supply circuit is to step-up or step-down the voltage, and it is commonly used in traditional non-isolated (flyback or forward) LED drivers. However, in a single-stage LED driver, the topology is usually based on a boost converter with power factor correction (PFC), and the transformer is eliminated to reduce size, cost, and complexity.

WINDING :

1). N1 : 2 —- 1 2UEW Φ 0.35mm 27Tx4Layer

2). N2 4 Copper foil 0.025t*7

2). N3 6—-5 Triple insulation winding wireΦ 0.6mm 14T
Totoku TIW-3 UL FILE NO.E66483 or equivalent

3). N4 8—-7 Triple insulation winding wireΦ 0.6mm 6T
Totoku TIW-3 UL FILE NO.E66483 or equivalent

4). N5 3—-4 2UEW Φ 0.25mm 25T

Applications:

1. Lighting

2. White Goods

3. metering

4. Telecom

5. industrial Controls

6. Stand-by Power

EE25 PDF Datasheet

Related articles across the web