TDA7266 PDF Datasheet – 7 + 7 W Dual Bridge Amplifier

Part Number: TDA7266

Function: 7+7W DUAL BRIDGE AMPLIFIER

Package: Multiwatt15 Type

Manufacturer: ST Microelectronics

Images:TDA7266 pdf amplifier

Description

The TDA7266 is a dual bridge amplifier specially designed for TV and Portable Radio applications.

A dual bridge amplifier, also known as a full-bridge amplifier or H-bridge amplifier, is an electronic circuit configuration commonly used to drive loads such as motors, speakers, or other devices that require bidirectional control. It’s often used in applications where precise control of the load’s direction and amplitude is needed.

The dual bridge amplifier consists of two bridge amplifier circuits, each capable of controlling the voltage or current across a load in one direction. When combined, they enable bidirectional control.

Features

1. Wide supply voltage range (3 – 18 V)

2. Minimum external components

(1) No SWR capacitor

(2) No bootstrap

(3) No boucherot cells

(4) Internally fixed gain

3. Standby and mute functions

4. Short-circuit protection

5. Thermal overload protection

PIN CONNECTIONS:TDA7266 datasheet pinout

TDA7266 PDF Datasheet

RTM875N-397 PDF – AC Performance Measurement Report

Part Number: RTM875N-397

Function: AC Performance Measurement Report

Manufacturer: Realtek Semiconductor

Images:RTM875N-397 pdf

Description

RTM875N-397 is AC Performance Measurement Report.

Measurement Equipment :

Clock Rise Time / Fall Time Are Measured by Tektronix® 6804B with Single-ended Probe

1. Mainframe with 8.0GHz Bandwidth

2. Mainframe with 20GS/s Sampling Rate

3. P7240 Active Probe with 4.0GHz Bandwidth (input: 1.0pF / 20K-ohm)
Clock Jitter & Duty Cycle Are Measured by Tektronix® 6804B with Differential Probe

4. P7330 Differential Active Probe with 3.5GHz Bandwidth (input: 0.5pF / 100K-ohm)

5. Tektronix® Jitter Analysis 3® Jitter Measurement Software

 

Measurement Environment:

1. Test board

 

Measurement Item:

Differential Clock

1. Slew_Rise & Slew_Fall

2. Vcross & ΔVcross

3. Cycle to Cycle jitter

4. Vmax & Vmin

5. Duty Cycle

Single-end Clock

1. Slew_Rise & Slew_Fall

2. Duty Cycle

3. Cycle to Cycle jitter

 

Measurement Summary:

1. From the measurement shown as follows, RTM875N-397 works good and meets all CLK Spec.

 

 

RTM875N-397 PDF Datasheet