V4580 PDF Datasheet – Noise Dual Operational Amplifier

A dual operational amplifier, often referred to as a “dual op-amp,” is an integrated circuit (IC) package that contains two separate operational amplifiers in a single housing. An operational amplifier, or op-amp, is a versatile electronic component used for amplification and signal processing in a wide range of electronic circuits.

Part Number: V4580

Function: Ultra Low Noise Dual Operational Amplifier

Package: SOP-8/225 (V4580E), SOP-8/300 (V4580M), DIP-8 (V4580D), SIP-8 (V4580L)

Manufacturer: Cool Audio

Images:V4580 pdf amplifier

Description

The V4580 is a state-of-the-art dual operational amplifier, specially designed for low-noise and low-distortion audio and measurement applications. The bi-polar design also offers wide gain-bandwidth and high current, short-circuit proof outputs to drive for example headphones, etc.

Features

1.  Operating voltage (±2 ~ ±18 V)

2. Ultra-low input noise voltage (0.8 µVrms typ.)

3. Wide gain-bandwidth (15 Mhz typ.)

4. Ultra-low distortion (0.0005 % typ.)

V4580 pinout datasheet

Applications:

1. Professional audio applications

2. Headphone amplifiers

3. Measurement amplifiers

4. General purpose application

Other data sheets are available within the file: V4580M

V4580 PDF Datasheet

SM-S4303R PDF Datasheet – Continuous Rotation Servo Motor

A continuous rotation servo motor, also known as a “360-degree servo,” is a type of servo motor that has been modified to rotate continuously in either direction without any physical stop. Unlike standard servo motors that have a limited range of motion (usually around 180 degrees), a continuous rotation servo can rotate continuously in a full 360-degree circle.

Part Number: SM-S4303R

Function: Continuous Rotation Servo Motor

Manufacturer: Pololu

Images:SM-S4303R pdf motor

Description

The SM-S4303R is a standard-sized servo that has been built by SpringRC specifically for continuous rotation. At 6 V, it has a maximum rotation speed of 54 RPM (no-load) and can produce up to 71 oz-in (5.1 kg-cm) of torque. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great actuator for beginner robotics projects.

The SM-S4303R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small slotted screwdriver to turn the middle-point positioner. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases.  […]

SM-S4303R datasheet pinout

SM-S4303R PDF Datasheet