17HS4401N PDF Datasheet – 2 Phase Hybrid Stepper Motor

Part Number: 17HS4401N

Function: 2 Phase Hybrid Stepper Motor ( 40 mm )

Manufacturer: MotionKing

Images:17HS4401N PDF Datasheet

Description

The 17HS4401N is 2 Phase Hybrid Stepper Motor.

A 2-phase hybrid stepper motor is a type of stepper motor that operates with two phases. It is a popular choice for precision positioning applications due to its ability to provide accurate angular displacement and control. The term “hybrid” refers to the combination of aspects from both permanent magnet (PM) and variable reluctance (VR) stepper motor designs.

Key features:

1. Two Phases: The motor has two sets of windings, often referred to as phase A and phase B. Each phase has its own coil windings and associated driver circuitry.

2. Stator and Rotor: The motor consists of a stator, which contains the coils or windings, and a rotor, which has teeth or poles. The rotor typically has a permanent magnet structure or a combination of permanent magnets and soft iron teeth.

3. Precise Control: The motor’s step angle, or the angular displacement per electrical input, is typically small, such as 1.8 degrees per step or even smaller, allowing for precise control and positioning.

4. Bi-polar Configuration: A 2-phase hybrid stepper motor is typically configured in a bipolar arrangement, meaning that each phase has two terminals that require a bipolar stepper motor driver to control the motor’s operation.

Ordering Informations :

17HS2408 1.8 28 0.6 8 10 12 1.6 34 4 150
17HS3401 1.8 34 1.3 2.4 2.8 28 1.6 34 4 220
17HS3410 1.8 34 1.7 1.2 1.8 28 1.6 34 4 220
17HS3430 1.8 34 0.4 30 35 28 1.6 34 4 220
17HS3630 1.8 34 0.4 30 18 21 1.6 34 6 220
17HS3616 1.8 34 0.16 75 40 14 1.6 34 6 220
17HS4401 1.8 40 1.7 1.5 2.8 40 2.2 54 4 280
17HS4402 1.8 40 1.3 2.5 5.0 40 2.2 54 4 280
17HS4602 1.8 40 1.2 3.2 2.8 28 2.2 54 6 280
17HS4630 1.8 40 0.4 30 28 28 2.2 54 6 280
17HS8401 1.8 48 1.7 1.8 3.2 52 2.6 68 4 350
17HS8402 1.8 48 1.3 3.2 5.5 52 2.6 68 4 350
17HS8403 1.8 48 2.3 1.2 1.6 46 2.6 68 4 350
17HS8630 1.8 48 0.4 30 38 34 2.6 68 6 350 […]

Related Posts

17HS4401N Datasheet

Related articles across the web

MB39A132 PDF – Rectification DC/DC Converter IC

The Part Number is MB39A132.

The function of this semiconductor is Synchronous Rectification DC/DC Converter IC.

The packkage is QFN 32 Pin Type

Manufacturer: Fujitsu

Preview images :

MB39A132 pdf

Description

MB39A132, which is used for charging Li-ion battery, is a synchronous rectification DC/DC converter IC adopting pulse width modification (PWM). It can control charge voltage and charge current separately and supports the N-ch MOS driver. In addition, MB39A132 is suitable for down-conversion.

MB39A132 has an AC adapter detection comparator, which is independent of the DC/DC converter control block, and can control the source supplying voltage to the system.

MB39A132 supports a wide input voltage range, enables low current consumption in standby mode, and can control the charge voltage and charge current with high precision, which is perfect for the built-in Li-ion battery charger used in devices such as notebook PC. […]

Features:

• Supports 2/3/4-Cell battery pack
• Two built-in constant current control loops
• Built-in AC adapter detection function (ACOK pin)
• Charge current control setting can be selected without using any external resistor. (RS = 20 mΩ: 2.85 A) Charge current can also be freely set by using the external resistor.
• Switching frequency can be set by using the external resistor (MB39A132 has a built-in frequency setting capacitor.):100 kHz to 2 MHz
• Built-in off time control function

Applications:
• Internal charger used in notebook PC
• Handy terminal device

MB39A132 pinout datasheet

MB39A132 PDF Datasheet