PAN3511 PDF – CMOS Process Optical Mouse Sensor

Part Number: PAN3511

Function: USB OPTICAL MOUSE SINGLE CHIP

Manufacturer: Pixart Imaging

Images:PAN3511 pinout datasheet

Description

The PAN3511 is an ultra low cost CMOS process optical mouse sensor single chip with USB interface that embedded internal RC function to replace external resonator and serves as a non-mechanical motion estimation engine for implementing a computer mouse.

CMOS (Complementary Metal-Oxide-Semiconductor) process optical mouse sensors are a type of sensor used in optical mice to detect movement. These sensors are based on CMOS technology, which is widely used in the semiconductor industry for its low power consumption, integration capabilities, and cost-effectiveness.

Features

1. USB interface

2. Single power supply

3. Optical motion estimation technology

4. Complete 2-D motion sensor

5. Accurate motion estimation over a wide range of surfaces

6. High speed motion detection up to 28 inches/sec

7. Power saving mode during times of no movement

8. Supports three buttons (R, M, L) and three axes (X, Y, Z) output

9. Z-axis support mechanical input (Z/2)

10. Internal RC oscillation without external resonator

11. Integrated USB transceiver and 1.5Mbps USB serial interface engine

Pin Description

Pin # Name Type Definition

1. BL IN Button left key input, normal pull-high (50k), press connect to low

2. LED/TEST I/O I/O trapping to select LED control or test mode

3. VDDQ BYPASS I/O voltage reference

4. VSS GND Chip ground

5. VDD5V PWR Chip power VDD, 5.0V

6. VDDA BYPASS Analog voltage reference

7. D+/CLK I/O USB D+ or PS/2 mouse clock line

8. D-/DATA I/O USB D- or PS/2 mouse data line

9. BR IN Button right key input, normal pull-high (50k), press connect to low

10. BM IN Button middle key input, normal pull-high (50k), press connect to low

11. Z2 IN Z axis, support mechanical scroller input

12. Z1 IN Z axis, support mechanical scroller input

Block Diagram

PAN3511 pdf sensor

PAN3511 PDF Datasheet

TDA4918A Datasheet – DIP 20, SMPS, Bipolar IC

Part Number: TDA4918A, Q67000-A8021

Function:  SMPS – IC with SIPMOS Driver Output

Package: P-DIP 20 Pin Type

Manufacturer: Simenes

Image

TDA4918A datasheet smps

Description:

The versatile switch-mode power supply ICs for the direct control of SIPMOS power transistors comprise digital and analog functions. These functions are required for the design of high-quality flyback and forward converters during single-phare and push-pull operation in normal, half-bridge and full-bridge configurations.

A versatile switch-mode power supply (SMPS) IC refers to an integrated circuit that provides the functionality and features required for creating efficient and flexible power supply solutions. These ICs are designed to regulate and convert electrical power efficiently, typically from a higher voltage source to a lower voltage output.

Versatile SMPS ICs are commonly used in a wide range of applications, including consumer electronics, industrial equipment, telecommunications, automotive electronics, and more.

Pinout

TDA4918A pinout siemens

 

Features:

1. Switching frequency up to 300 kHz ( TDA 4919 ) or 150 kHz ( TDA 4918 )
2. Push-pull output driver with + 700 mA / – 500 mA
3. Separate GND for the driver outputs
4. Feed-forward control
5. Soft start
6. Hysteresis adjustable at overvoltage and undervoltage comparator
7. Current mode and voltage mode operation are possible

TDA4918A Datasheet


 

Related articles across the web