DK125 Datasheet – AC-DC Switch Mode Power Controller

Function: 650mA LNB-Power Supply & Control Voltage Regulator

Package: DIP 8 Pin type

Manufacturer: Dongke Semiconductor ( www.dkpower.cn )

Image

 

Description

The DK125 is a secondary side fly-back type AC-DC Switch Mode Power Controlling IC. Designed with high integration CMOS circuit, it has protection functions for short circuit, secondary side open circuit, over temperature, over voltage and so on. With built-in HV power transistor and patented Self-Power supply circuit, it has the characteristics of saving external components, simple transformer design with only two windings in isolated output circuit, etc.

Features

· 90V—265V wide range AC power input.

· Built-in 700V HV BJT

· Internal integrated high voltage starting circuit, no need for additional resistance

· Burst mode (22kHz Intermittent operation mode)

· Standby power consumption < 0.3W

· 65KHz PWM switching frequency

· 4KV ESD

· Internal power compensation circuit to keep the stability of output in different input situation

· Patented self-power supply design, no need for auxiliary winding in transformer

· Internal frequency modulation circuit to reduce EMI filter cost

 

Pinout

1 GND Ground reference of IC

2 GND Ground reference of IC

3 FB Feedback control pin, external grounded connecting with 1nF~4.7nF capacitor

4 VCC IC Power supply pin, external grounded connecting with 47uF~100uF
capacitor(LOW ESR type better, especially in low temp. working)

5,6,7,8 OC Output pin of power transistor, externally connected with transformer

 

Feedback Control

The chip adopts the PWM control mode, which limits the peak current by cycles, and adjusts the limiting current by detecting the feedback voltage of FB. When PWM is turned on, the chip detects the output current of the power transistor, until the output current of the power transistor reaches the current limit current, the power transistor is turned off and waits for the next PWM turn-on cycle. When FB voltage is between 1.2v-2.1v, it will adjust the limiting current linearly.

Applications

· Battery charger

· DVD/VCD/VCR power supply

· Power AC/DC adapters

· Air conditioner power supply

· STB power supply

· LED driver applications

· Electromagnetic oven power supply

· TV/Monitor power supply

 

DK125 Datasheet

DK125 pdf

Posts related to the search results for ‘power controller‘

Part number Description
P2808 Power Controller IC, MOSFET, P2808B0
MIC2012PCM USB Power Controller
THX-203H Switching Power Controller IC
P2808B0 Power Controller IC ( PDF )
STRW6556A Regulator, Power Controller
P2808A1 P2808A1 Datasheet Pinout – Power Controller IC
P2808B0 MOSFET, SMD 8Pin, POWER Controller
DK112 Switch Mode Power Controller

 

STI8035 Datasheet – Control Voltage Regulator

STI8035 is a monolithic voltage regulator and interface IC, packaged in eSOP8EL, specifically designed to provide the 14/19V power supply with high fficiency and the 22kHz EXTM signaling to the LNB down-converter in the antenna dish or to the multi-switch box.

Function: 650mA LNB-Power Supply & Control Voltage Regulator

Package: eSOP8L package、eTSSOP14L package

Manufacturer: Sunto Semiconductor

Image

STI8035 datasheet

 

Description

STI8035 consists of a BOOST converter and a low-noise inear regulator along with
the circuitry required for EXTM injection and pin controllable interface. The device
makes the total LNB supply design simple, efficient and compact with low external
component count.

Features

1. Low noise output to avoid sensitivity of Can Tuner and DISH’s LNA dropping
down

2.  Noise < +/-80mV@350MHz BWL,

3. Noise < +/-50mV@20MHz BWL

4.  Single chip solution on 700mVpp 22KHz EXTM with 10μ s Trise/Tfall for less Transferring noise

5. LNB Voltages (2 levels: 14V and 19V) compatible with common
standards, Push-pull output stage minimizes 14→ 19V and 19V→ 14V
output transition times

 

Pinout

STI8035 pinout

VIN 1 Power Supply input

VOUT 2 Output voltage for the LNB

BOOST 3 BOOST converter output voltage sense, and internal LDO’s input
terminal

VCP 4 Charge Pump for LDO supply

LX 5 DC-DC converter switch node connection, connects to inductor

EN 6 When this pin is low, the output is disabled. Setting EN = 1 enables the
output voltage

H_L 7 Output Voltage set input pin, high:19V, Low:14V

EXTM 8 22KHz EXTM signal input pin

GND 9 Power Ground (Exposed pad)

The external modulation input (EXTM pin) can accept a tome modulated DiSEqC
command and transfer it symmetrically to the output to meet DiSEqC 1.x protocol.

 

Applications

1. LNB Power supply For DVB-S/S2/ABS

2. Digital STB

3. Satellite TV cards

 

STI8035 Datasheet

STI8035 pdf

Posts related to the search results for ‘Voltage Regulator‘

Part number Description
MC7805BT 1A, 5V, Voltage Regulator
APL5501 500mA, Fixed Voltage Regulator
APL5509-17AC-TR Voltage Regulator
LD1117 800mA, Low Drop Voltage Regulator
3122V 3122V Datasheet, SI-3122V PDF – Voltage Regulator – Sanken
LD1117A 1A, Positive Voltage Regulator
L78L12CZ 12V, Positive Voltage Regulator
LM7815CK 15V, Voltage Regulator
PQ09RF21 2A, 9V, Voltage Regulator
LM7809 1A, 9V, Voltage Regulator – Fairchild