HT4936S Datasheet – Mobile Power Management Chip

HT4936S is Mobile Power Management Chip.

Part Number: HT4936

Function: N-Channel 22-V (D-S) 175°C MOSFET

Package: SOP 16 type

Manufacturer: HOTCHIP

Images:

HT4936S-power-management-chip

Description

The HT4936S is a monolithic, mobile power management chip that uses advanced charge-and-discharge port sharing and synchronous rectification with low external components and excellent performance. Form a good 1A-in / 1A-out 4LEDs mobile power.

Circuit

HT4936S-circuit

Features

1. Built-in maximum 1A linear charging mode, charging current adjustable externally;

2. trickle / constant current / constant voltage three-stage charging, 4.20V / 4.35V optional support 0V battery charge;

3. built-in charging can automatically reduce the charging current according to temperature rise, 130 degrees began to decline, the minimum can be reduced to 0;

4.step-up using synchronous rectification circuit, the highest efficiency over 90%, low heat, fixed 5.1V output, do not need external Resistance setting

5. Boost output current 1A (BTP = 3.6V);

6. With constant power output function, a complete over current, short circuit protection, built-in temperature protection automatically stop temperature rise over-temperature;

Pinout
HT4936S-datasheet-pinout

HT4936S Datasheet

Posts related to the search results for ‘Chip‘

Part number Description
TF024RP Thin Film Chip Resistor
92HD81 Single-chip Audio System – IDT
TSUMV59XUS TSUMV59XUS PDF – Single Chip Solution for Analog TV
CYT3000B Linear Constant Current LED Chip
DS1302 Trickle-Charge Timekeeping Chip
82C55A Programmable Peripheral Interface Chip
KB3926QF-D2 Management Laptop IC Chip – ENE
CSR8670 Audio System-On-Chip Solution
EXC-CL4532U1 115Ohm, 100MHz Ferrite, Chip Bead Core
8895CSNG7EP3 8895CSNG7EP3 PDF – Combo TV Special Decoder Chip

 

IP2312 Datasheet – Battery Synchronous Switch Buck Charging IC

IP2312 is a 5V input that supports single-cell lithium battery synchronization Switching buck charge management IC.

Function: Single-cell lithium battery synchronous switch buck charging IC

Package: ESOP8 Pin type

Manufacturer: Injoinic ( www.injoinic.com )

Image

IP2312 datasheet

 

Description

IP2312 integrates power MOS and adopts synchronous switching architecture to enable
It requires only a few peripheral components during application and effectively reduces the overall The size of the solution reduces the BOM cost.

IP2312 Boost Switching Charge Converter Operating Frequency 750KHz, the maximum charging current is 3A, 5V input, 3.7V/2A conversion The conversion efficiency is 94%; the charging current can be set through an external resistor.

Features

1. Synchronous switch step-down charging

2. Charging efficiency 94% (3.7V/2A)

3. Maximum charging current 3A

4. Charging current can be adjusted by external resistor

5. Automatically adjusts the input current and is compatible with small current adapters

6. Support 4.20V/4.30V/4.35V/4.4V battery

7. Support charging NTC temperature protection

8. Supports LED charging status indication

9. Built-in power MOS

10. 750KHz switching frequency, can support 1uH inductor

11. Input overvoltage and undervoltage protection

12. IC over-temperature protection

13. Charging timeout protection

14. ESD 4KV

 

Pinout

IP2312 schematic pinout

 

 

 

Applications

1. Single-cell lithium battery/lithium-ion battery charging

IP2312 Datasheet

IP2312 pdf

Posts related to the search results for ‘Charging IC‘

Part number Description
T5336 SOP 8 Pin – Wireless Charging IC
TPS2546 USB Charging Port Controller
TP4057 Lithium Battery Cell Charging IC
CHK8108 Li-ion Battery Charging Chip
PMP8851 USB Battery Charging Reference