M5003 PDF Datasheet – EL LAMP DRIVER IC

Part Number: M5003

Function: EL LAMP DRIVER IC

Pakcage: CHIP SIZE ~ 1.3 x 1.5 mm2 Type

Manufacturer: MOSDESIGN SEMICONDUCTOR

Images:

M5003 PDF

Description

The M5003 is CMOS chip design for Electro-luminescence Lamp (EL) to light has independent circuit to control switching and EL driver frequency circuit, The switching frequency is decided by CKX, If OSC connect a resistor to VDD, or connect a capacitor to VSS the switching frequency can be adjusted. Delay function can be implement if ON connect a capacitor to VSS. The time of delay is decided by the value of capacitor.

MOSDESIGN SEMICONDUCTOR CORP. EL CONTROLE M5003 EL LAMP DRIVER IC

Features

• DC to AC conversion
• Built-in RC oscillator
• Two trigger inputs
(1) TG : active High
(2) TGB : active Low
• Adjustable EL driver frequency by CKX
• Adjustable Switching frequency by CHOPX

Applications:
• EL display

BLOCK DIAGRAM:

OSC Oscillator CKX Divider Inductor Driver CHOP CHOPX Oscillator ON Oscillator Delay Time Divider EL Driver CK TGB TG S1 S2 Control Logic *All specs and applications shown above subject to change without prior notice.

MOSDESIGN SEMICONDUCTOR CORP. EL CONTROLE M5003 EL LAMP DRIVER IC

ABSOLUTE MAXIMUM RATING:

Parameter Supply Voltage Input Voltage Operating Temperature Storage Temperature Rating -0.3 to 5.0 -0.2~VDD +0.2 -20 to 75 -40 to 90 Unit V V ℃ ℃ (TA=25℃) ELECTRICAL CHARACTERISTICS Characteristics Operating Voltage Operating Current Quiescent Current Driving Current CK Frequency CHOP Frequency Oscillator Frequency Sym. VDD IOP ISB IOL IOH FCK FCHOP Fosc Min. 0 Typ. 3 0.1 1 10 100 400 16 25 Max. 3.5 0.5 5 60 Unit V mA μA μA Hz KHz ℃ @VDS=0.5V @VOH=2.5V ±30% TOL. ±30% TOL. External±30% No load Conditions PIN Description Pad Name VDD TG ON OSC CHOPX CKX S2 S1 VSS TGB CK CHOP Description Positive power supply Trigger input active at High Delay option pin, connect cap to VSS Switching freq adjust pin, connect R to VDD Switching freq adjust pin, connect R to VSS EL freq adjust pin, connect cap to VSS EL driving frequency select pin EL driving frequency select pin Negative power supply Trigger input active at Low DC to AC converter output DC to AC converter output 2/4 2002-06-25 [ … ]

M5003 datasheet

Pin Description

VDD Positive power supply
TG Trigger input active at High
ON Delay option pin, connect cap to VSS
OSC Switching freq adjust pin, connect R to VDD
CHOPX Switching freq adjust pin, connect R to VSS
CKX EL freq adjust pin, connect cap to VSS
S2 EL driving frequency select pin
S1 EL driving frequency select pin
VSS Negative power supply
TGB Trigger input active at Low
CK DC to AC converter output
CHOP DC to AC converter output

M5003 Datasheet

BP2822 Datasheet – LED constant current controller – BPS

Part Number: BP2822

Function: Non-isolated Buck LED constant current controller

Package: DIP 8 Pin type

Manufacturer: BPS Confidential ( www.bpsemi.com )

Image:

BP2822 image

Description

BP2822 is a precision LED constant current control chip, used in non-isolated Buck LED power supply system for a full range of input AC voltage or DC voltage input of 12V ~ 600V.

BP2822 integrated 600V power MOSFET, requires only a few external components, can achieve excellent constant current characteristic.

This chip inside with high-precision current sampling circuit, while using the patented constant current control technology, high-precision LED constant current output and excellent line regulation. Chip inductor current in critical mode, the system does not vary with the output current and inductance LED operating voltage changes, achieve excellent load regulation.

Pinout

BP2822 datasheet pinout

Features

1. Critical mode, without inductance compensation

2. Built-in 600V power MOSFET

3. The source driver, without auxiliary power winding

4. Up to ± 3% LED current accuracy

BP2822 Datasheet PDF


 

Related articles across the web