RT9214 Datasheet – Synchronous Buck PWM DC-DC Controller

Part Number: RT9214

Function : 5V/12V Synchronous Buck PWM DC-DC Controller

Manufacturer: Richtek Technology

Image:  RT9214 Image

General  Descript ion

The RT9214 is a high efficiency synchronous buck PWM controllers that generate logic-supply voltages in PC based systems. These high performance , single output devices include internal soft -start, frequency compensation networks and integrates al   of  the control ,  output adjustment, monitoring and protection functions into a single package.
The device operating at fixed 300kHz frequency provides an optimum compromise between efficiency, external component size, and cost. Adjustable over-current protect ion (OCP) monitors the voltage drop across theRDS(ON) of  the lower MOSFET for synchronous buck PWM DC/DC controller.  The over current  function cycles the soft-start in 4-times hiccup mode to provide fault protection, and in an always hiccup mode for under-voltage protection.

Pinout:

RT9214 Pinout

Official Homepage: http://www.richtek.com/en/Products/Switching%20Regulators/Single-Phase%20Step-Down%20Controller/RT9214

Features

1. Operating with 5V or 12V Supply Voltage
2. Drives All Low Cost N-MOSFETs
3. Voltage Mode PWM Control
4. 300kHz Fixed Frequency Oscillator
5. Fast Transient Response:
– High-Speed GM Amplifier
– Full 0 to 100% Duty Ratio
6. Internal Soft-Start
7. Adaptive Non-Overlapping Gate Driver
8. Over Current Fault Monitor on MOSFET, No Current Sense Resistor Required
9. RoHS Compliant and 100% Lead (Pb)-Free

RT9214 Circuit

RT9214 Datasheet

RT9214 Datasheet


 

Related articles across the web

CR6202 Datasheet PDF – Switching Power Supply Controller IC

Part Number: CR6202

Function: Switching Power Supply Controller IC

Package: DIP 8 Pin Type

Manufacturer: Chip-Rail, Power Rail

Pinouts:

CR6202 datasheet

 

Description

CR6202 is a high-performance current mode flyback PWM controller for AC/DC transformer with high performance and price ratio,  which supplies continuous output power of 5W within the range of wide-voltage between 85V and265V, the output power of peak value can be  up  to  18W. The combination of optimized reasonable circuit design and bipolar facture technology with high performance and price ratio economizes the whole cost ultimately. The power controller can be applied to the typical flyback circuit topology so as to form a simple AC/DC transformer.

Features

1. Set-in high-voltage power switch transistor of 700V and few peripheral components
2. With the modulation of lock pulse width, the testing is according to the pulse limit current.
3. Inner-built ramp and anti-feedback compensation function
4. Set-in heat protection circuit
5. Few peripheral components
6. Low startup and operating current
7. VCC over-voltage automatic limit

 

components

 

 

Other data sheets are available within the file: CR6202T

CR6202 Datasheet PDF Download

CR6202 pdf