Part Number: V216B1-L02

Function: 21.6 Inch, TFT LCD Module

Pixel Number : 1366 x R.G.B. x 768 pixel

Manufacturer: Chi Mei

Images:

Description

The V216B1-L02 model is a 21.6 inch wide TFT-LCD module with a 4-CCFL Backlight Unit and a 30-pin 1ch-LVDS interface. This module supports 1366 x 768 (16:9 wide screen) mode and displays up to 16.7 ( 6-bit+Hi-FRC colors) millions colors. The inverter module for the Backlight Unit is not built in.

Features

1. Excellent Brightness : 400nits

2. Contrast Ratio : 800:1

3. Fast Response Time : 5ms

4. Color Saturation : NTSC 72%

5. WXGA (1366 x 768 pixels) Resolution

6. DE (Data Enable) Only Mode

7. LVDS (Low Voltage Differential Signaling) Interface

8. Viewing Angle: 170(H)/160(V) (CR>10) TN Technology

9. Color Reproduction (Nature Color) […]

Specifications:

1. Active Area 477.417 (H) x 268.416 (V) (21.6” diagonal) mm

2. Bezel Opening Area 481.5 (H) x 272.5 (V) mm

3. Driver Element a-si TFT active matrix –

4. Pixel Number 1366 x R.G.B. x 768 pixel

5. Pixel Pitch (Sub Pixel) 0.1165 (H) x 0.3495 (V) mm

6. Pixel Arrangement RGB vertical stripe –

7. Display Colors 16.7 millions color

8. Display Operation Mode Transmissive mode / Normally White

TFT LCD (Thin-Film Transistor Liquid Crystal Display) module is a type of flat-panel display that uses thin-film transistor technology to improve the image quality and response time of traditional LCDs. TFT LCD modules consist of a layer of liquid crystal material sandwiched between two sheets of glass or plastic substrates, with each pixel controlled by its own thin-film transistor.

TFT LCD modules are widely used in various electronic devices such as smartphones, tablets, laptops, gaming devices, and automotive displays because they offer high resolution, high contrast, and fast refresh rates.

 

V216B1-L02 PDF Datasheet

Part Number: JHD162A

Function: 16 X 2, LCD MOUDULE

Module Size : 80.0 x 36.0 x 14.0 mm ( W x H x T )

Manufacturer: ETC

Images:

Description

JHD162A is a 16×2 character LCD module that can display up to 32 characters at once on its screen.

A 16×2 character LCD module is a common type of display used in various electronic devices, projects, and systems. It consists of 16 columns and 2 rows, allowing it to display up to 32 characters at a time. Each character position can display a single alphanumeric character or symbol. These LCD modules are widely used in embedded systems, microcontroller-based projects, and various electronics applications to provide a simple text-based interface.

Features

• Display construction : 16 Characters – 2 Lines

• Display mode : TN/STN

• Display type : Positive Transflective

• Backlight : LED(B/5.0V)

• Viewing direction : 6 o’clock

• Operating temperature : Indoor

• Driving voltage : Single power

• Driving method : 1/16 duty,1/5 bias

• Type : COB (Chip On Board)

• Number of data line : 8-bit parallel

• Connector : Pin

 

1 VSS GROUND 0V (GND)
2 VCC POWER SUPPLY FOR LOGIC CIRCUIT +5V
3 VEE LCD CONTRAST ADJUSTMENT
4 RS INSTRUCTION/DATA REGISTER
5 R/W READ/WRITE SELECTION
6 E ENABLE SIGNAL
7 DB0
8 DB1
9 DB2
10 DB3
11 DB4
12 DB5
13 DB6
14 DB7
15 LED+ SUPPLY VOLTAGE FOR LED+ +5V
16 LED- SUPPLY VOLTAGE FOR LED- 0V

Some typical applications of 16×2 character LCD modules include displaying information like temperature, time, status messages, and other relevant data in projects ranging from basic DIY electronics to more advanced systems. They are relatively easy to use and provide a cost-effective way to display information without the need for complex graphical displays.

1. Large screen size for displaying more information.

2. Built-in controller simplifies interfacing with a microcontroller.

3. LED backlight makes the screen easy to read in low light conditions.

4. Low power consumption makes it ideal for battery-powered device

Related Posts

• JRM-12232A
• JHD12864E
• LTA320AP05
• V216B1-C01
• LCD-1602B

JHD162A PDF Datasheet