Part Number: SEL1015, SEL1615C

Function: Narrow-directivity LED

Package: 5∅ Round Type

Manufacturer: Sanken electric

Images:

Description

SEL1015 is Round Narrow-directivity LED. A narrow-directivity LED, also known as a directional LED or high-brightness LED, is a type of light-emitting diode designed to emit light in a specific direction with a narrow beam angle. Unlike traditional LEDs that emit light in a wide, omni-directional pattern, narrow-directivity LEDs are engineered to focus their light output in a particular direction. This feature makes them suitable for various applications where precise illumination and control over the light distribution are necessary.

External Dimensions (Unit: mm) Directivity (Typical) ø5.6±0.2 20.0min 5.5±0.5 19.0min 0.8 Cathode 8.2±0.2 (1.0) ø5.0±0.2 0° 30° 60° 30° 60° (2.54) 0.5±0.1 0.5 1.1max 0.8 Resin heap 1.5max 90° 100% 50 0 50 90° 100% Tolerance: ±0.3 Absolute maximum ratings (Ta=25°C) Symbol IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Rating 30 −0.45 100 3 −30 to +85 −30 to +100 Condition Above 25°C f=1kHz, tw≤100µs Electrical Optical characteristics (Ta=25°C) Part Number Forward voltage Reverse current Intensity Peak wavelength Spectrum half width VF Condition IR Condition IV Condition λP Condition ∆λ Condition Chip (V) IF (µA) VR (mcd) IF (nm) IF (nm) IF material typ max (mA) max (V) typ (mA) typ (mA) typ (mA) 1.75 2.2 10 100 3 700 20 660 10 30 10 GaAIAs Emitting color Lens color Highintensity red SEL1615C Clear 14 […]

SEL1015 PDF Datasheet

Related articles across the web

• General-Purpose Operational Amplifier

Part Number: SMD5050

Function: White SMD LED

Package: 5.0*5.0*1.6mm (TOP view white LED)

Manufacturer: Synergy21 ( WWW.SYNERGY21.DE )

Images:

 

Description

SMD5050 is White SMD LED. LED stands for “Light Emitting Diode.” It is a semiconductor device that emits light when an electric current passes through it. LEDs are commonly used for various lighting applications, ranging from indicators on electronic devices to street lighting and displays. They have become increasingly popular due to their energy efficiency, long lifespan, and versatility in design.

Features

1. Package: 5.0*5.0*1.6mm (TOP view white LED)

2. Emitted Color: White

3. Mono-color type

4. Soldering methods: All SMT assembly methods

5. Comply ROHS standard

Pinouts:

Applications:

1. LCD back light.

2. Mobile phones: LCD,

3. Status indicators: Consumer&industrial electronics

4. General use

 

Precautions for use :

1. Customer must apply the current limiting resistor in the circuit so as to drive the LEDs within the rated current. Otherwise slight voltage shift maybe will cause big current change and burn out will happen

2. Also, caution should be taken not to overload the LEDs with instantaneous high voltage at the turning ON and OFF of the circuit

3. Storage:
3.1 Don’t open the moisture proof bag before ready to use the LEDs
3.2 The LEDs should be kept at 30°C or less and 60%RH or less before opening the package. The max. storage period before opening the package is 1 year
3.3 After opening the package, the LEDs should be kept at 30°C/35%RH or less, and it should be used within 7 days
3.4 If the LEDs be kept over the conditions of 3.4, baking is required before mounting. Baking condition as below: 60±5°C for 12 hrs

4. Soldering condition:
4.1 Manual of soldering:
The temp. of the iron should be lower than 280°C and soldering within
3sec per solder-pad is to be observed
4.2 Pb-free solder temp. –time profi le

 

SMD5050 PDF Datasheet