Part Number: 25L4006E, MX25L4006E
Function: 4M Bit CMOS Serial Flash Memory
Package: 8-pin SOP (150mil), 8-pin SOP (200mil), 8-pin PDIP (300mil )
Manufacturer: Macronix International
Images:
Description
The 25L4006E device features a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus. The four bus signals are a clock input (SCLK), a serial data input (SI), a serial data output (SO), and a chip select (CS#). Serial access to the device is enabled by CS# input. When it is in Dual Output read mode, the SI and SO pins become SIO0 and SIO1 pins for data output. The device provides sequential read operation on whole chip. After program/erase command is issued, auto program/erase algorithms which program/erase and verify the specified page or sector/block locations will be executed. Program command is executed on byte basis, or page basis, or word basis for erase command is executes on sector, or block, or whole chip basis.
Serial Flash Memory is a type of non-volatile memory that stores data using a serial interface instead of a parallel interface. It is also commonly referred to as Serial NOR Flash. Unlike parallel flash memory, which transfers data in parallel over multiple data lines, serial flash transfers data serially, bit by bit, over a single data line.
Serial flash memory is commonly used in a wide range of applications, including consumer electronics, automotive systems, and industrial and medical devices, due to its compact size, low power consumption, and fast read and write speeds. Some popular serial flash memory products include the Serial Peripheral Interface (SPI) NOR Flash and the Three-wire Serial NOR Flash.
Pinout
Feaures
1. Serial Peripheral Interface compatible — Mode 0 and Mode 3
2. 4,194,304 x 1 bit structure or 2,097,152 x 2 bits (Dual Output mode) structure
3. 128 Equal Sectors with 4K byte each
– Any Sector can be erased individually
4. 8 Equal Blocks with 64K byte each
– Any Block can be erased individually
25L4006E Datasheet PDF
