24C16WP Datasheet PDF – SERIAL 16K EEPROM – ST

Part Number: 24C16WP, M24C16-WMN6TP

Function: 16 KBIT SERIAL I2C BUS EEPROM

Package: DIP 8 Pin Type

Manufacturer: STMicroelectronics

Image: 24C16WP Image

Description

The 24C16WP is a 16-Kbit I2C-compatible EEPROM (Electrically Erasable PROgrammable
Memory) organized as 2 K × 8 bits.

The M24C16-W can be accessed (Read and Write) with a supply voltage from 2.5 V to
5.5 V, the M24C16-R can be accessed (Read and Write) with a supply voltage from 1.8 V to
5.5 V, and the M24C16-F can be accessed either with a supply voltage from 1.7 V to 5.5 V
(over the full temperature range) or with an extended supply voltage from 1.6 V to 1.7 V. All
these devices operate with a clock frequency of 400 kHz.

Pinouts:

24C16WP Datasheet

 

Reference PDF : 24C16WP-datasheet.pdf

Official Homepage: https://www.st.com/en/memories/m24c16-w.html

24C16WP Datasheet PDF Download


24C16WP pdf

Related articles across the web

PN25F08 Datasheet PDF – 8M-Bit Serial Flash Memory

Part Number: PN25F08

Function: 8M-Bit Serial Flash Memory

Package:  SOP 8, TSSOP 8 Pin Type

Manufacturer: PARAGON( www.paragontech.cn )

Image

PN25F08 8Mbit flash memory

Description

The PN25F08 is a 8M-bit (1M-byte) Serial Flash memory, with advanced write protection mechanisms. The PN25F08 supports the standard Serial Peripheral Interface (SPI). The Device can be programmed 1 to 256 bytes at a time, using the Page Program instruction. It is designed to allow either single Sector/Block at a time or full chip erase operation. The PN25F08 can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block.

Pinout

PN25F08 pinout datasheet

The chip select signal indicates when a instruction for the device is in process and the other signals are relevant for the memory device. When the /CS signal is at the logic high state, the device is not selected and all input signals are ignored and all output signals are high impedance.

Features

1. Software/Hardware Write Protection

2. 256-Byte Security Registers with OTP Lock

3. Enable/Disable protection with WP Pin

4. Write protect all/portion of memory via software

5. Top or Bottom, Sector or Block selection

PN25F08 Datasheet PDF

PN25F08 pdf


 

Related articles across the web