OP Amp archives - Page 6 of 47

Part Number: LT1014

Function: Quad Precision Operational Amplifier

Package: SOIC 16 Pin, DIP 14 Pin, LCCC 20 Pin

Pinouts:

LT1014 datasheet

Description

The LT1014, LT1014A, and LT1014D are quad precision operational amplifiers with 14-pin industry-standard configuration. They feature low offset-voltage temperature coefficient, high gain, low supply current, and low noise.

The LT1014, LT1014A, and LT1014D can be operated with both dual ±15-V and single 5-V power supplies.The common-mode input voltage range includes ground, and the output voltage can also swing to within a few milivolts of ground. Crossover distortion is eliminated.

Features

1. Input Offset Current 1.5 nA Max at 25°C
2. Low Supply Current 2.2 mA Max at 25°C
3. Low Peak-to-Peak Noise Voltage 0.55 μV Typ
4. Low Current Noise 0.07 pA/√Hz Typ

Other data sheets are available within the file: LT1014CN, LT1014DDW, LT1014A, LT1014D

LT1014 Datasheet PDF

Description

The OPA634 and OPA635 are low power, voltage feedback, high-speed amplifiers designed to operate on
+3V or +5V single-supply voltages. Operation on ±5V or +10V supplies is also supported. The input range
extends below ground and to within 1.2V of the positive supply. Using complementary common-emitter outputs provides an output swing to within 30mV of ground and 140mV of positive supply. The high output drive current, low differential gain and phase errors make them ideal for single-supply composite video line driving. Low distortion operation is ensured by the high gain bandwidth (140MHz) and slew rate (250V/µs). This makes the OPA634 and OPA635 ideal input buffer stages to 3V and 5V CMOS converters. Unlike other low power, single-supply operational amplifiers, distortion performance improves as the signal swing is decreased.